ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Powering up a church sound system  (Read 1141 times)

Mark Proulx

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Powering up a church sound system
« on: July 26, 2011, 02:40:18 pm »

We have a sound system that using a Furman to power the system in sequence.  Our Aviom i16/-m pops when powered up in the sequence.  it powers after the Crown amps.  I would like to change the sequence such that the amps power up last.  My theory is that the pop will not occur if the amps are cold when the Aviom system powers up.  Aviom says this will work.  Does anyone know why an amp would be set up to turn on before the Aviom system turns on?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6354
  • Audio Plumber
Posting rules
« Reply #1 on: July 26, 2011, 02:56:01 pm »

We have a sound system

Please go to your profile and change the "Name" field to your real full name as required by the posting rules clearly displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section.

Mac
Logged
Pages: [1]   Go Up
 


Page created in 0.031 seconds with 24 queries.