ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: LabSub > EAW KF940?  (Read 11767 times)

Pat Semeraro

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
Re: LabSub > EAW KF940?
« Reply #10 on: April 26, 2013, 07:52:37 pm »

For me the choice is simple.  With the UX8800 processor, it can be run at war volume and not blow up.  Enter a few details like input sensitivity, ohm load and output power, and the processor takes care of EQ and limiting, both excursion and thermal.  YES it prevents you from squeezing the last .5 dB out of the cabinet but it will work show after show.  As always, if you need more output - add more boxes.
Logged

drew gandy

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 327
  • Chicago and burbs
Re: LabSub > EAW KF940?
« Reply #11 on: May 08, 2013, 12:39:32 pm »

For me the choice is simple.  With the UX8800 processor, it can be run at war volume and not blow up.  Enter a few details like input sensitivity, ohm load and output power, and the processor takes care of EQ and limiting, both excursion and thermal.  YES it prevents you from squeezing the last .5 dB out of the cabinet but it will work show after show.  As always, if you need more output - add more boxes.
So your choice is for the UX8800?  Interesting...
Logged
Arrogance is usually far worse than ignorance. But every once in awhile they swap places.

ProSoundWeb Community

Re: LabSub > EAW KF940?
« Reply #11 on: May 08, 2013, 12:39:32 pm »


Pages: 1 [2]  All   Go Up
 



Page created in 0.038 seconds with 23 queries.