ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [All]   Go Down

Author Topic: SC48 Case  (Read 7402 times)

Scott LaRochelle

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
SC48 Case
« on: July 12, 2011, 03:49:21 PM »

Hey guys,
Maybe I missed it already on here, but I am looking to get a case made for an SC48.  Im no longer dealing with the company I was dealing with before.  Who is a good company out there?  How much did you pay?  Any Pics?  Thanks in advance...
Logged

Justin Sinclair

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: SC48 Case
« Reply #1 on: July 12, 2011, 07:07:11 PM »

Hey guys,
Maybe I missed it already on here, but I am looking to get a case made for an SC48.  Im no longer dealing with the company I was dealing with before.  Who is a good company out there?  How much did you pay?  Any Pics?  Thanks in advance...

DO NOT use MT CASES!  Go to R&R
Logged

Scott Flaws

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Re: SC48 Case
« Reply #2 on: July 12, 2011, 08:11:37 PM »

I used Mt for my profile case and there is no issues. What is wrong with MT?
Logged

Kevin Maxwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1792
  • USA SW CT 46miles from MidTown Manhattan ATCF
Re: SC48 Case
« Reply #3 on: July 12, 2011, 09:19:27 PM »

The only R&R case I am familiar with was for a PM5DRH and was a fantastic case. And it was built for a PM5D that traveled a lot. But it was so heavy that it was a real pain to move around. I think the total weight with the console in the case was about 600 pounds.

I would like to see a case that is sturdy but light. Does someone make a composite material case that fits the bill? Like made out of some sort of honeycomb type of material.
Logged

Justin Sinclair

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: SC48 Case
« Reply #4 on: July 13, 2011, 02:14:39 PM »

I used Mt for my profile case and there is no issues. What is wrong with MT?


MT built my SC48 case and it caused $1500 worth of damage to my console, which I had to pay for.
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23743
  • Wichita, Kansas USA
Re: SC48 Case
« Reply #5 on: July 13, 2011, 02:38:59 PM »


MT built my SC48 case and it caused $1500 worth of damage to my console, which I had to pay for.

I think our SC48 case is from L&M.

How was your console damaged by the case?
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Dana Sampson

  • Newbie
  • *
  • Offline Offline
  • Posts: 33
    • Quickbeam Systems Inc.
Re: SC48 Case
« Reply #6 on: July 13, 2011, 03:48:52 PM »

I think our SC48 case is from L&M.

How was your console damaged by the case?
The last console case we got was from L&M.  Pretty nice case!!  Great turnaround time!!
Logged

Justin Sinclair

  • Newbie
  • *
  • Offline Offline
  • Posts: 12
Re: SC48 Case
« Reply #7 on: July 13, 2011, 07:32:21 PM »

I think our SC48 case is from L&M.

How was your console damaged by the case?

They didn't design a safe place to put the computer monitor.  It fell off in transit and broke some encoders.  Digidesign/Avid was awesome though.  Came to my hotel and replaced them for me.  Still had to pay....
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 23743
  • Wichita, Kansas USA
Re: SC48 Case
« Reply #8 on: July 13, 2011, 07:54:14 PM »

They didn't design a safe place to put the computer monitor.  It fell off in transit and broke some encoders.  Digidesign/Avid was awesome though.  Came to my hotel and replaced them for me.  Still had to pay....

Thanks.
Logged
"If you're passing on your way, from Palm Springs to L.A., Give a wave to good ol' Dave, Say hello to progress and goodbye to the Moonlight Motor Inn." - Steve Spurgin, Moonlight Motor Inn

Doug Hammel

  • Full Member
  • ***
  • Offline Offline
  • Posts: 110
Re: SC48 Case
« Reply #9 on: July 13, 2011, 08:01:12 PM »

Hey guys,
Maybe I missed it already on here, but I am looking to get a case made for an SC48.  Im no longer dealing with the company I was dealing with before.  Who is a good company out there?  How much did you pay?  Any Pics?  Thanks in advance...
Yes the R+R cases are heavier than many others but there is a reason for it. They are heavy-duty no comprimise cases plain and simple. That is the way Mike and boys have been building there cases for years now. With their cases it is one less thing I have to worry about. Money well spent. 

Doug Hammel
Lead Audio Engineer
Image Technical Services
Logged

Steve Payne

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 449
    • Soundworks of Virginia, Inc.
Re: SC48 Case
« Reply #10 on: July 13, 2011, 09:21:21 PM »

Hey guys,
Maybe I missed it already on here, but I am looking to get a case made for an SC48.  Im no longer dealing with the company I was dealing with before.  Who is a good company out there?  How much did you pay?  Any Pics?  Thanks in advance...

We used Olympic Case out of Florida.  Very satisfied in every respect.  Right at $1800.

http://www.olycase.com/


Logged
Steve Payne
like us on Facebook at:
https://www.facebook.com/SOUNDWORKSOFVIRGINIA

Evan Roussos

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: SC48 Case
« Reply #11 on: July 16, 2011, 02:05:45 PM »

Hey guys,
Maybe I missed it already on here, but I am looking to get a case made for an SC48.  Im no longer dealing with the company I was dealing with before.  Who is a good company out there?  How much did you pay?  Any Pics?  Thanks in advance...

Hey I got a great idea! Maybe YOU could be that pioneering trailblazing soul and member of this Pro Audio community to get one of the Rock Hard Cases rotating mixer cases for your SC48! And then tell us if it rocks or if it drops!

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120750229852

Obviously, if you're a guy who has minions working for you and you can just point and watch other guys lift your Sc48 off the ground, then never mind.

As far as stability issues, please read the answer I got from them on the rotating mixer thread. Hey just a thought. Good luck on your choice.
Logged

Thomas Lamb

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 531
Re: SC48 Case
« Reply #12 on: July 17, 2011, 09:21:50 AM »

Steven,
Do you have a picture of that case with the console in it? I am about to order a sc48 case from olympic and want to make sure I learn of anything you may not like. It looks like the holes that are cut for the lights are spread to far compared to the SC48 I have sitting next to me(critical I know but when you pay that much you want it right). Also a pic of the doghouse would be awesome.

T

« Last Edit: July 17, 2011, 09:23:52 AM by Thomas Lamb »
Logged
bigTlamb

"If you suck on a functional analog desk, you'll really suck on a complex digital desk...." Dick Rees

Steve Payne

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 449
    • Soundworks of Virginia, Inc.
Re: SC48 Case
« Reply #13 on: July 18, 2011, 10:09:14 AM »

Steven,
Do you have a picture of that case with the console in it? I am about to order a sc48 case from olympic and want to make sure I learn of anything you may not like. It looks like the holes that are cut for the lights are spread to far compared to the SC48 I have sitting next to me(critical I know but when you pay that much you want it right). Also a pic of the doghouse would be awesome.

T

Hi Thomas -
  The photos can be misleading if you are looking at the small details, sorry.  They are not of my case.  They are of a case for a Digi system (perhaps a Venue?) that Bob Farina sent me showing construction details of how they would build my SC48 case.  I attached those because they were handy and I thought demonstrated the overall case design.  I will be going over to the shop today or tomorrow and will take and post some photos of my case, including the doghouse. 
Logged
Steve Payne
like us on Facebook at:
https://www.facebook.com/SOUNDWORKSOFVIRGINIA

Steve Payne

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 449
    • Soundworks of Virginia, Inc.
Re: SC48 Case
« Reply #14 on: July 18, 2011, 05:56:41 PM »

Steven,
Do you have a picture of that case with the console in it? I am about to order a sc48 case from olympic and want to make sure I learn of anything you may not like. It looks like the holes that are cut for the lights are spread to far compared to the SC48 I have sitting next to me(critical I know but when you pay that much you want it right). Also a pic of the doghouse would be awesome.

T

Thomas -  I took about 10 photos of the case today.  For some reason the board software is not letting me attach them.  (4 .jpg files per post under 512k total) ??  Give me an email address and I will send all of them to you hi res.
Logged
Steve Payne
like us on Facebook at:
https://www.facebook.com/SOUNDWORKSOFVIRGINIA

Vince Steed

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
    • Steed Audio, Inc.
Re: SC48 Case
« Reply #15 on: July 19, 2011, 02:52:22 PM »

Hey guys,
Maybe I missed it already on here, but I am looking to get a case made for an SC48.  Im no longer dealing with the company I was dealing with before.  Who is a good company out there?  How much did you pay?  Any Pics?  Thanks in advance...
Yes the R+R cases are heavier than many others but there is a reason for it. They are heavy-duty no comprimise cases plain and simple. That is the way Mike and boys have been building there cases for years now. With their cases it is one less thing I have to worry about. Money well spent. 

Doug Hammel
Lead Audio Engineer
Image Technical Services

I couldn't agree more with Doug.  The R&R case I purchased for my SC48 is the best investment I've made this year, just after the SC48 itself.  I highly recommend their design.  ;D
Logged
"The secret of life is enjoying the passage of time."
James Taylor

ProSoundWeb Community

Re: SC48 Case
« Reply #15 on: July 19, 2011, 02:52:22 PM »


Pages: 1 2 [All]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.05 seconds with 24 queries.