ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: EtherSound and TCP/IP with Yamaha SB168  (Read 2757 times)

Collin Donohue

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 80
EtherSound and TCP/IP with Yamaha SB168
« on: January 20, 2011, 10:31:00 pm »

We've got an M7CL-48 with an MY16-ES64 and an MY16-EX with a pair of SB168's set up in ring mode.

I'm not able to check for a few days, but would anyone happen to know...

Can I use the extra Cat5 jack on the back of the Yamaha SB168 and one of the extra Cat5 jacks on the MY card to hook up TCP/IP devices?  System architect for example?

Or do EtherSound and TCP/IP not play together?

Thanks!
Logged

Chip Self

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
    • Logic Systems Sound & Lighting
Re: EtherSound and TCP/IP with Yamaha SB168
« Reply #1 on: January 21, 2011, 11:07:29 pm »

It is "possible" to tunnel data on the ES line. However, there are no obvious hard & fast rules about what will / will not work. Best bet is to try it when you can afford to have a mistake.

Chip
Logged
Pages: [1]   Go Up
 


Page created in 0.049 seconds with 23 queries.