ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Flown Microwedge  (Read 1166 times)

Hayden J. Nebus

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 637
  • Richmond, VA
Flown Microwedge
« on: July 18, 2011, 09:51:02 pm »

I am attampting to fly a pair of my EAW MW12 on a fixed pipe grid.

A waist high test rig revealed that the flytrack doesn't really allow any adjustment of vertical orientation, so the box hangs at a pretty steep (baffle down) angle no matter what.

Anyone run into this? It's like there should be another piece of flytrack on the connector side..



Logged

ProSoundWeb Community

Flown Microwedge
« on: July 18, 2011, 09:51:02 pm »


Pages: [1]   Go Up
 



Page created in 0.044 seconds with 22 queries.