ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: DBX Driverack settings for Radian Neo 1500XD wedge monitor  (Read 1405 times)

Thomas Robinson

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
DBX Driverack settings for Radian Neo 1500XD wedge monitor
« on: June 30, 2011, 03:57:45 pm »

Hello, does anyone have recommendations for where to start with this combination? I cannot even find the time offset correction number. I'm using Crest 7001 amps. The factory is shipping a monitor to try out. Many thanks,

Thomas Robinson
Concert Sound Inc.
Portland, Oregon, USA
Logged

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6807
  • Boston, MA USA
Re: DBX Driverack settings for Radian Neo 1500XD wedge monitor
« Reply #1 on: June 30, 2011, 07:40:41 pm »

Thomas,
Pretty poor reference material on Radians web site, and you would think that this should be a no brainer. Obviously you want to bi-amp the cabinet or yopu wouldn't need the DSP. I suggest you call Radian and ask them for the crossover point and suggested hi-pass and low-pass settings then work from there using the best tool of all, your ears. Not what you want to hear, but that's exactly what I had to do with a DR480 recently. Be assured it only hurts a little.
Logged
BOSTON STRONG........
Proud Vietnam Veteran

I did a gig for Otis Elevator once. Like every job, it had it's ups and downs.

ProSoundWeb Community

Re: DBX Driverack settings for Radian Neo 1500XD wedge monitor
« Reply #1 on: June 30, 2011, 07:40:41 pm »


Pages: [1]   Go Up
 



Page created in 0.09 seconds with 24 queries.