ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Lab Sub Build Question  (Read 6347 times)

Travis Dean TenKley

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 62
Lab Sub Build Question
« on: May 01, 2011, 10:07:00 PM »

I'm starting to build 4 lab subs.  the only question that I really have is what is the space between the two subs or from one side of the box to the sub?  I haven't seen any kind of documentation on this.  Or will all the pieces just "fit" together once I start to assemble it?

Thanks.
Logged

Chris Jensen

  • Full Member
  • ***
  • Offline Offline
  • Posts: 109
  • Los Angeles
Re: Lab Sub Build Question
« Reply #1 on: May 03, 2011, 10:32:32 PM »

I'm starting to build 4 lab subs.  the only question that I really have is what is the space between the two subs or from one side of the box to the sub?  I haven't seen any kind of documentation on this.  Or will all the pieces just "fit" together once I start to assemble it?

Thanks.

Look at this page form the LSP Document page: http://www.prosoundweb.com/lsp/labhorn2b.jpg
http://classic-web.archive.org/web/20031018200325/home.comcast.net/~labhorn/pics/flare_glueup.jpg
http://classic-web.archive.org/web/20031018160645/home.comcast.net/~labhorn/pics/flares_installed.jpg

It seems that there is 7" between the baffle boards.  The module is centered.  The panels are 90 deg to each other of sorts.  Look at some of the 3d images on the LSP page.  The pieces will fit together.  If you build the module correct it will just need to be fit inside of the box correctly.  Make sure you do a layout on one of the sides.  You will see there will be some funny stuff with measurements because the original plan was written in inches.  Try using the 18mm plans instead as that is most likely the wood you are using. 

Also this page should be of some help.  It's too bad it's not linked at the LSP page.
http://classic-web.archive.org/web/20050209025454/home.comcast.net/~labhorn/
Peter Sylvester used to post on here a long time ago and has some great photos and direction on his page.

Chris
Logged

Travis Dean TenKley

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 62
Re: Lab Sub Build Question
« Reply #2 on: May 04, 2011, 12:31:30 AM »

Look at this page form the LSP Document page: http://www.prosoundweb.com/lsp/labhorn2b.jpg
http://classic-web.archive.org/web/20031018200325/home.comcast.net/~labhorn/pics/flare_glueup.jpg
http://classic-web.archive.org/web/20031018160645/home.comcast.net/~labhorn/pics/flares_installed.jpg

It seems that there is 7" between the baffle boards.  The module is centered.  The panels are 90 deg to each other of sorts.  Look at some of the 3d images on the LSP page.  The pieces will fit together.  If you build the module correct it will just need to be fit inside of the box correctly.  Make sure you do a layout on one of the sides.  You will see there will be some funny stuff with measurements because the original plan was written in inches.  Try using the 18mm plans instead as that is most likely the wood you are using. 

Also this page should be of some help.  It's too bad it's not linked at the LSP page.
http://classic-web.archive.org/web/20050209025454/home.comcast.net/~labhorn/
Peter Sylvester used to post on here a long time ago and has some great photos and direction on his page.

Chris

Very cool. Thanks.  Now the only thing I need is a layout of the cutting and I could build 10 of these in a day:)
Logged

Albert Thomas

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 78
Re: Lab Sub Build Question
« Reply #3 on: June 12, 2011, 12:21:14 AM »

Look at this page form the LSP Document page: http://www.prosoundweb.com/lsp/labhorn2b.jpg
http://classic-web.archive.org/web/20031018200325/home.comcast.net/~labhorn/pics/flare_glueup.jpg
http://classic-web.archive.org/web/20031018160645/home.comcast.net/~labhorn/pics/flares_installed.jpg


Also this page should be of some help.  It's too bad it's not linked at the LSP page.
http://classic-web.archive.org/web/20050209025454/home.comcast.net/~labhorn/
Peter Sylvester used to post on here a long time ago and has some great photos and direction on his page.

Chris

Thanks a ton for the links Chris. They clear up a lot of fog I had on that section of the construction. I feel I have a good enough grasp now to take a crack at it... as soon as I clear my shop out  ::)
Logged

ProSoundWeb Community

Re: Lab Sub Build Question
« Reply #3 on: June 12, 2011, 12:21:14 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 25 queries.