ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: M7CL Matrix question  (Read 12054 times)

kristianjohnsen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1063
  • Lillehammer, Norway
    • Lillehammer Lyd og Lys
Re: M7CL Matrix question
« Reply #10 on: May 12, 2011, 05:51:08 pm »

The M7 doesn't have this.

I have not clocked a lot of time in front of the M7CL, but on other Yamaha offerings you can go to the pair/group menu and link whatever output faders you wish.  I do this all the time with AUX fed subs where adjustment of the master will be tracked by the AUX master feeding the subs.  All other aspects of the outputs remain unaffected by this link.

Thanks for clearing that up.

That's a real shame, btw!
Logged

Matthew Carruthers

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: M7CL Matrix question
« Reply #11 on: May 16, 2011, 01:56:50 am »

Assign all inputs to a DCA so you have an "oops!" fader/mute switch.

The correct approach is the one you're using, regarding feeding matrices from post-fader sends on the M7.

Thats the ticket...putting all inputs on one DCA.. didn't even think of that :)

I really do appreciate all of your help... I swear, I have learned so much from lurking around in this forum over the past couple of years.. seriously...


Matt
Logged

ProSoundWeb Community

Re: M7CL Matrix question
« Reply #11 on: May 16, 2011, 01:56:50 am »


Pages: 1 [2]  All   Go Up
 



Page created in 0.049 seconds with 23 queries.