ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Unclogging Look Unique Hazer  (Read 3386 times)

Brian Gowing

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
    • Gowing Associates
Unclogging Look Unique Hazer
« on: January 14, 2011, 01:47:42 pm »

I acquired a used Look Unique (not Unique 2) hazer. Everything works on it except it's clogged and I've been unsuccessful at getting it unclogged. I've tried to use vinegar to run through it but the air pump hose keeps blowing off the Y fitting. A new heater core costs about $285 so I'd like to find a cheaper solution. Anyone got any ideas of what I can try to unclog it?

Thanks,
Brian
Logged
Brian Gowing
Technical Consultant
Christian & Missionary Alliance
Gowing Associates

Matt Jordan

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • "Man, this is fun!"............."Still!"
    • Maxxsounds Audio co.
Re: Unclogging Look Unique Hazer
« Reply #1 on: January 16, 2011, 08:36:14 pm »

Hi Brian,

  I have been succsessful using a 75% to 25% vinegar to distilled water mix. Just let it sit for about a week. About a 30% chance of it coming back alive. The key is to clean it according to the manufacturer's recomendations before it gets that bad.

 Hope that helps.
Logged
Matt Jordan
     Maxxsounds Audio co. Boise, ID
       www.maxxsoundsaudio.com





Give the people what they want, they will give you what you want.

Brian Gowing

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
    • Gowing Associates
Re: Unclogging Look Unique Hazer
« Reply #2 on: January 17, 2011, 07:59:58 am »

Thanks Matt. I'll try that and hopefully that will take care of it. I suspect that the previous owner didn't follow the directions on usage and that it got clogged and they kept trying to use.
Logged
Brian Gowing
Technical Consultant
Christian & Missionary Alliance
Gowing Associates

Gus Housen

  • Full Member
  • ***
  • Offline Offline
  • Posts: 196
Re: Unclogging Look Unique Hazer
« Reply #3 on: February 25, 2011, 09:17:14 pm »

i was rooting around a hobby shop one day and found some very small diameter metal rod, i had a old Fogger I inherited that didnt work. the small rod worked.
Logged

ProSoundWeb Community

Re: Unclogging Look Unique Hazer
« Reply #3 on: February 25, 2011, 09:17:14 pm »


Pages: [1]   Go Up
 



Page created in 0.038 seconds with 24 queries.