Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Tracy Garner]

Almost all of the music I play from my laptop is mp3 or AAC files. The output device make a much bigger difference in the sound quality than the file type, as long as you are not using crappy 128mp3 files. How do you get a ground hum from a USB device that does not have a pin 1 connection (the Peavey)?

The USB interface can also be a fraction of the cost of a decent DI, even though it will perform better.

Mac

...just saw the Peavey unit. Transformer balanced isolated, etc.  I would use this for myself especially with the Mono/Stereo switch and you can't beat the price.

[Canute J. Chiverton]

I think the problem arises when the signal comes straight out of the Laptop to the Board. It is best to use a  Quality Soundcard to send the output(s) first into the DJ Mixer. Then send the Mixer's output(s) to the Board. A soundcard like this works for me. http://www.esi-audio.com/products/gigaporthd/

[Albert Thomas]

Finally got the Peavey USB-P after ordering it 9 weeks ago. It was worth the wait. Sound quality is noticeably better even to my battered ears. More detailed highs, more articulate bass, and better dynamics compared to the laptop headphone out. It's got to be the single biggest bang for the buck sound improvement that I've purchased. I recommend it to anyone still using a laptop headphone out as a source.

[Rob Spence]

I would be more likely to use the USB interface for my own laptop though. My preference in that case is the M-Audio since it works natively with ProTools.

Which brings a question to my mind. Now with the newer ProTools which works with lots of 3rd party devices, are there now normal Windows and Mac drivers for the Mbox series?

[ProSoundWeb Community]