ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Timer for amp  (Read 1583 times)

Bradford "BJ" James

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 392
Timer for amp
« on: April 27, 2011, 02:23:37 PM »

I have a customer who wants to put a timer on a background music system. The easiest way for him to do this is to use a timer on the amp (Yorkville 4040). Apparently he has bought a timer, but it does not shut the amp off. He replaced it with a similar unit hoping it was a bad timer. I haven't seen it. I presume it is a Walmart or similar digital timer. Will a regular HD mechanical timer work for this? I presume the problem has something to do with the size of the amp, and I know some timers cannot be used with certain appliances such as florescent lighting.
Proud Canadian dealer for Danley Sound Labs, A&H, Yamaha, QSC, Yorkville and more.

Mark Mattocks

  • Newbie
  • *
  • Offline Offline
  • Posts: 39
Re: Timer for amp
« Reply #1 on: April 27, 2011, 05:19:56 PM »

Is this a timer that turns off the outlet? Interrupting current to the amplifier will turn it off, no matter how large the amplifier.

Hal Bissinger/COMSYSTEC

  • Full Member
  • ***
  • Offline Offline
  • Posts: 225
Re: Timer for amp
« Reply #2 on: April 27, 2011, 08:34:59 PM »

Some timers don't utilize actual contacts but rather solid state devices to control the load. The latter are for use with resistive loads and will cause problems with inductive loads. I think this is what's happening here.


ProSoundWeb Community

Re: Timer for amp
« Reply #2 on: April 27, 2011, 08:34:59 PM »

Pages: [1]   Go Up

Site Hosted By Ashdown Technologies, Inc.

Page created in 0.141 seconds with 24 queries.