ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: yamaha rev 500  (Read 7932 times)

george iverieli

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
    • soundzone
yamaha rev 500
« on: April 25, 2011, 09:37:16 am »
Hi guyz, I just bought Yamaha rev 500 processor on ebay and was interested if anybody has used it, what are the pros and cons.

thnx gio
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 21363
  • Wichita, Kansas USA
Re: yamaha rev 500
« Reply #1 on: April 25, 2011, 12:46:07 pm »
Quote from: george iverieli on April 25, 2011, 09:37:16 am
Hi guyz, I just bought Yamaha rev 500 processor on ebay and was interested if anybody has used it, what are the pros and cons.

thnx gio

If you know little or nothing about the device, why did you buy it?

It's not a bad sounding box, but it's far from stellar.  The primary limitation of it is you can have a variety of EFX so long as you want to have reverb with them.  Chorus?  Sure thing.. how long a reverb do you want?  Flange?  How much reverb?  Get the picture?
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

MARK PAVLETICH

  • Newbie
  • *
  • Offline Offline
  • Posts: 40
Re: yamaha rev 500
« Reply #2 on: April 26, 2011, 06:18:26 am »
Quote from: Tim McCulloch on April 25, 2011, 12:46:07 pm
If you know little or nothing about the device, why did you buy it?

It's not a bad sounding box, but it's far from stellar.  The primary limitation of it is you can have a variety of EFX so long as you want to have reverb with them.  Chorus?  Sure thing.. how long a reverb do you want?  Flange?  How much reverb?  Get the picture?

Actually I  have used one for the last 12 years. Reliable and clean sounding reverb. The plate settings with some of the ring eq-ed out is the best setting for me. Forget about other effects and just use it as a dependable clear and clean reverb.
Logged

Dave Dermont

  • Forum Moderator
  • Global Moderator
  • Sr. Member
  • *****
  • Offline Offline
  • Posts: 367
  • From The Great Pocono Northeast
Re: yamaha rev 500
« Reply #3 on: April 28, 2011, 05:41:45 pm »
Quote from: george iverieli on April 25, 2011, 09:37:16 am
Hi guyz, I just bought Yamaha rev 500 processor on ebay and was interested if anybody has used it, what are the pros and cons.

thnx gio

Yamaha Reverb - Preset #1 - Edit time to around two seconds (1.8 to 2.2, depending on my mood) - Edit pre delay to 20 ms. - GO!

Yes, preset #1 (Hall) is the same on every Yamaha reverb made since the beginning of time. (1981)
Logged
Dave Dermont

Warning: Dates on calendar may be closer than they appear

Ryan Yorck

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
Re: yamaha rev 500
« Reply #4 on: April 29, 2011, 01:07:21 am »
Great for verb, not so great for other effects.  Bought one used from a forum member about four years ago and it's still going strong. 

Quote from: george iverieli on April 25, 2011, 09:37:16 am
Hi guyz, I just bought Yamaha rev 500 processor on ebay and was interested if anybody has used it, what are the pros and cons.

thnx gio
Logged

ProSoundWeb Community

Re: yamaha rev 500
« Reply #4 on: April 29, 2011, 01:07:21 am »

Pages: [1]   Go Up
« previous next »
 



Page created in 0.045 seconds with 24 queries.