ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Community RS-880 .. help  (Read 3531 times)

Kristinn Sigurthorsson

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Community RS-880 .. help
« on: April 23, 2011, 09:18:37 PM »

Good morning

Can anyone help me here. I have an old RS-880 Community speakers and the high-frequency speaker is gone (VHF-100) .Where can I buy spare parts for these speakers (elsewhere than from Community. The retail price in Iceland at the Community dealer, for the diaphragm, is a about 350 $) I´m trying to fixing the speaker and I need the item in the picture.

Kind regards
Kristinn Sigurþórsson
Reykjavík
Iceland

Logged

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 9538
  • Atlanta GA
Re: Community RS-880 .. help
« Reply #1 on: April 23, 2011, 10:28:52 PM »

Since Community is the actual manufacturer of the VHF100, you will need to get the part from them.  There are no substitutes that I am aware of.

You need to be very careful when installing it.  How tight you tighten the screws can affect the freq response.  So be sure to monitor the response when installing it.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

ProSoundWeb Community

Re: Community RS-880 .. help
« Reply #1 on: April 23, 2011, 10:28:52 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.022 seconds with 24 queries.