ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yamaha LS9 Help...  (Read 20835 times)

Timothy C. Lee

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Yamaha LS9 Help...
« on: January 23, 2011, 09:43:25 PM »

I am having the worst time trying to get the effects on a Yamaha LS9-32 board to work.  I have routed plate reverb to use aux 16 as an input and output to the Stereo 4 channel.  I have sent signal via routing a signal through aux 16, but I don't get any metering or signal present lights in the plate reverb view.  I used the "rack 4" position to put the reverb in there.  I hope i am making sense.  Hopefully someone familiar with this board will know what I am doing wrong.  Do I need to setup the input and output of the reverb differently?  

Thanks for your help.

Tim
Logged

Taylor Phillips

  • Newbie
  • *
  • Offline Offline
  • Posts: 47
Re: Yamaha LS9 Help...
« Reply #1 on: January 23, 2011, 10:15:10 PM »

Can you get a screen shot, or a console file for us to look at? I think you're probably in rack space 8, rather than 4, since the LS9 doesn't let you put effects in the first four spaces. Anyway, press the mix 16 button twice to see sends on fader for that aux, and make sure the inputs you want to add reverb to are turned on. If they are, and turned up, go the 'Master' layer and make sure mix 16 is turned on.  Hope this helps.  If not, a screenshot or a file would help us help you.

Edit: Your routing looks like it should be fine, unless there's something you've missed.
Logged

Dick Rees

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 452
Re: Yamaha LS9 Help...
« Reply #2 on: January 23, 2011, 10:24:49 PM »

Did you turn the channel send "on"?

See page 62 in the manual.

And remember that  rack spaces 1-4 are for GEQ's only.  You'll need to assign the EFX to any of the racks 5-8.

See page 152 in the manual.
Logged

Timothy C. Lee

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Yamaha LS9 Help...
« Reply #3 on: January 26, 2011, 08:36:03 PM »

Thanks guys I had the inputs to the sends down.  So many fader layers I confused myself.  Thanks  for the help guys.

Tim
Logged

ProSoundWeb Community

Re: Yamaha LS9 Help...
« Reply #3 on: January 26, 2011, 08:36:03 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 21 queries.