ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Behringer Europower EPQ2000 Power Amplifier  (Read 5317 times)

Dinesh Ramlogan

  • Newbie
  • *
  • Offline Offline
  • Posts: 11
Behringer Europower EPQ2000 Power Amplifier
« on: April 21, 2011, 09:27:36 am »

Does anyone have any experience with these amps?
Do you know if it is reliable?
How is the sound?
Is it noisy?
How do the the other features on it perform?
Logged

thomas jones

  • Newbie
  • *
  • Offline Offline
  • Posts: 24
  • NE WI
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #1 on: April 21, 2011, 10:50:08 am »

I have several EP2500s. I understand that these are QSC clones. I have driven mine hard for several years without any issues. They are clean, quiet, reliable and powerful. The model you are considering was labeled EP1500 up until 2 years ago when they changed only the labeling, not the actual amp. The EP2500 was similarly re-labeled to EP4000 but is still the same amp with the same output as the EP2500. I have seen some threads here and elsewhere about problems with these models that occurred from new product initial startup, but the solutions were quick and easy; send it back and they send you a new one. I believe Behringer has fixed the glitches now so the incidence of failure is even less than before.
Logged
I came late but I made up for it by leaving early.

Chris Carpenter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 316
  • Baton Rouge
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #2 on: April 21, 2011, 06:59:58 pm »

Does anyone have any experience with these amps?
Do you know if it is reliable?
How is the sound?
Is it noisy?
How do the the other features on it perform?

Also, I cant find the thread, but somewhere on the interweb, somebody tested several amplifier's output verses their rated power. Behringer did surprisingly well compared to several more established brands.
Logged

David Sheldon

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #3 on: April 21, 2011, 09:17:19 pm »

The model you are considering was labeled EP1500 up until 2 years ago when they changed only the labeling, not the actual amp.

Not true. The new version of the EP1500 is the EP2000.

The OP is talking about the EPQ2000, which is a lightweight switch mode design.

http://www.behringer.com/EN/Products/EPQ2000.aspx
Logged

Bob Leonard

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6807
  • Boston, MA USA
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #4 on: April 21, 2011, 10:42:14 pm »

Does anyone have any experience with these amps?
Do you know if it is reliable?
How is the sound?
Is it noisy?
How do the the other features on it perform?

Behringer hardware, especially the amplifiers are very popular in the towns of Glouchester, New Bedford, and around Cape Cod. They make great anchors.
Logged
BOSTON STRONG........
Proud Vietnam Veteran

I did a gig for Otis Elevator once. Like every job, it had it's ups and downs.

Chris Carpenter

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 316
  • Baton Rouge
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #5 on: April 21, 2011, 11:02:54 pm »


Behringer hardware, especially the amplifiers are very popular in the towns of Glouchester, New Bedford, and around Cape Cod. They make great anchors.

Meh, not heavy enough.
Logged

Dave Dermont

  • Forum Moderator
  • Global Moderator
  • Sr. Member
  • *****
  • Offline Offline
  • Posts: 365
  • From The Great Pocono Northeast
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #6 on: April 22, 2011, 01:15:46 am »

I have not used that particular model.

The ones I have used were better than no power amp at all.
Logged
Dave Dermont

Warning: Dates on calendar may be closer than they appear

Gary A. Perrett

  • Newbie
  • *
  • Offline Offline
  • Posts: 36
Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #7 on: April 22, 2011, 02:01:21 am »

Looks and has the same specs as the EPX2000... I have set up a couple systems that had them and after about a year there have been no complaints from the owners (a couple of DJ/KJ types)... they seem very happy with them...

From my point of view? well, light but not stupid light...build quality was ~ok, power was bridged mono on a pair of front loaded 15" subs, and it was fine...

As usual, with Behringer the question is longevity.

G
Logged

ProSoundWeb Community

Re: Behringer Europower EPQ2000 Power Amplifier
« Reply #7 on: April 22, 2011, 02:01:21 am »


Pages: [1]   Go Up
 



Page created in 0.047 seconds with 24 queries.