ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: 48db/Octave on Itech Crossovers  (Read 1557 times)

Justin Myers

  • Full Member
  • ***
  • Offline Offline
  • Posts: 121
48db/Octave on Itech Crossovers
« on: April 19, 2011, 05:29:53 am »


I'm trying to find info on the use of 48db/octave slopes on crossovers.

I'm trying to set up a 3 way system using Itech HD and Itech amps.
So, Crown Itech HD amps on the Mid/Hi with FIR Brickwall filters as the overall extra latency is only 1ms. At the Mid/Sub crossover point the latency for FIR filters is too much so I thought using 48db/octave Linkwitz Riley filters.
Is the phase distortion for 48db/octave filters too much for practical use?


Pages: [1]   Go Up

Page created in 0.054 seconds with 21 queries.