ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2] 3 4 ... 6   Go Down

Author Topic: Sound Booth Pictures  (Read 89433 times)

Jeff Foster

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: Sound Booth Pictures
« Reply #10 on: August 26, 2007, 09:56:21 pm »

Here are some pictures of ours.  Our lighting is controlled in a completely separate booth upstairs.  This booth is for sound and video only.  It exits to a rear hallway.

index.php/fa/172/0/
Logged
Jeff Foster
Technical Director
Northside Baptist Church
Carrollton Texas
www.nsbcc.org

Jeff Foster

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: Sound Booth Pictures
« Reply #11 on: August 26, 2007, 09:57:36 pm »

...index.php/fa/173/0/
Logged
Jeff Foster
Technical Director
Northside Baptist Church
Carrollton Texas
www.nsbcc.org

Jeff Foster

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: Sound Booth Pictures
« Reply #12 on: August 26, 2007, 09:59:08 pm »

Facing the stage....
index.php/fa/174/0/
Logged
Jeff Foster
Technical Director
Northside Baptist Church
Carrollton Texas
www.nsbcc.org

Billy Merrill

  • Newbie
  • *
  • Offline Offline
  • Posts: 9
Re: Sound Booth Pictures
« Reply #13 on: August 27, 2007, 01:18:26 pm »

Kevin,

I like the way the plan was revised. Much better.


Side Bar question to Jeff.

On your Mackie TT24, where did you get the colored labels for the board?  I also noticed an unusual mount for wireless antennas. Is this a creation of yours as well?

Thanks in advance,

Billy
Logged

Jeff Foster

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: Sound Booth Pictures
« Reply #14 on: August 27, 2007, 04:44:21 pm »

Billy Merrill wrote on Mon, 27 August 2007 12:18

Side Bar question to Jeff.

On your Mackie TT24, where did you get the colored labels for the board?  I also noticed an unusual mount for wireless antennas. Is this a creation of yours as well?

Thanks in advance,

Billy



I don't recall where I originally got the file to make the labels.  It was either on the prosoundweb.com forums (church or regular) or on the churchmedia.net forums.  I altered the file quite a bit to come up with the template.  I will post it later for anyone interested.
I color code a lot of the stuff to match.  For example, all my handheld vocals are blue and match the VCA group as well.  This makes it a bit easier for others to walk up and get a feel for the layout.

The antenna mount is a custom build.  It's basically just some 3/8" MDF cut to size with some small "L" brackets holding two pieces together.  I then added BNC passthrough connectors and some leftover rubber feet from some older equipment.  A bit of paint and some BNC cables run below the counter to the receivers in the rack and it's ready to go.
Logged
Jeff Foster
Technical Director
Northside Baptist Church
Carrollton Texas
www.nsbcc.org

Jeff Foster

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 85
Re: Sound Booth Pictures
« Reply #15 on: August 27, 2007, 10:19:12 pm »

Here is the file as promised...

http://www.nsbcc.org/downloads/tt24_labels.doc
Logged
Jeff Foster
Technical Director
Northside Baptist Church
Carrollton Texas
www.nsbcc.org

Jerrybosun

  • Jr. Member
  • **
  • Offline Offline
  • Posts: 77
Re: Sound Booth Pictures
« Reply #16 on: August 28, 2007, 12:48:52 am »

A bit or forced perspective




index.php/fa/175/0/
Logged

Craig Champagne

  • Newbie
  • *
  • Offline Offline
  • Posts: 4
    • http://kustomkid.org
Re: Sound Booth Pictures
« Reply #17 on: September 02, 2007, 11:00:44 pm »

Hey Kevin, We just remodeled our sound booth because it was way too small. Were building a new church as we speak so we didn't need to go big with this one as we new we would only use it for another year. Go to my site   kustomkid.org   and you can see the construction process. Since it was only a Mackie 24 channel board, we put sliders underneath it so we could gain access to the wiring behind it. Notice the importance of running the audio wiring under and away from the a/c voltage/outlets-This alone got rid of a nearby TV station coming thru my sound system. We will be adding a projector system with a laptop soon.
Logged

Daniel Cash

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Re: Sound Booth Pictures
« Reply #18 on: September 05, 2007, 07:12:38 pm »

Jeff Foster wrote on Mon, 27 August 2007 19:19

Here is the file as promised...

http://www.nsbcc.org/downloads/tt24_labels.doc




Jeff,  

Your sound booth is impressively organized and clean.

How do you interface all those media players (CD, DVD, PC, VCR, Tape) to your sound board? Do most of your devices have XLR out? My church uses a TT24 and the current method of connecting things (PC, CD, DVD) from their RCA out through direct boxes feels incorrect/inefficient to me.


Thanks
-Daniel
Logged

James Westra

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Sound Booth Pictures
« Reply #19 on: September 06, 2007, 11:23:46 am »

I am very new and ignorant but I have a question about the sound booth walls.
Won't the walls inhibit the low end freq. from getting to the sound guy?  Would a railing or fence be more practical?
Logged

ProSoundWeb Community

Re: Sound Booth Pictures
« Reply #19 on: September 06, 2007, 11:23:46 am »


Pages: 1 [2] 3 4 ... 6   Go Up
 



Page created in 0.028 seconds with 21 queries.