ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Updating StudioLive firmware  (Read 2863 times)

John Roll

  • Full Member
  • ***
  • Offline Offline
  • Posts: 245
Updating StudioLive firmware
« on: April 13, 2011, 10:25:56 AM »
Is there a procedure for updating the firmware in my 16.4.2s? Both my boards are v1.12 and v1.13 is available.

John
Logged
John Roll
JMR Pro Audio

QSC, JBL, Presonus, Audix, K&M, EWI, Furman

Brian Wilkinson

  • Newbie
  • *
  • Offline Offline
  • Posts: 48
Re: Updating StudioLive firmware
« Reply #1 on: April 13, 2011, 10:51:54 AM »
Quote from: John Roll on April 13, 2011, 10:25:56 AM
Is there a procedure for updating the firmware in my 16.4.2s? Both my boards are v1.12 and v1.13 is available.

John

John, you must download the new "Universal Control" from Presonus and install on your computer. Connect the mixer to your computer with the fire wire cable and start Universal Control. Once it is up, if it doesn't tell you you need new firmware click the check firmware under settings and it will update itself.
Logged

ProSoundWeb Community

Re: Updating StudioLive firmware
« Reply #1 on: April 13, 2011, 10:51:54 AM »

Pages: [1]   Go Up
« previous next »
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 22 queries.