ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: line 6 digital microphones  (Read 6752 times)

Henry Cohen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 952
  • Westchester Co., NY, USA
Re: line 6 digital microphones
« Reply #20 on: April 08, 2011, 01:16:50 pm »

What are "wireless access points"?
A wireless router?
A wireless laptop?
Wireless keyboard/printer?
Wii?
A cell phone?
All of the above?
More?

How close does one have to be to get "significant amount of RF energy"

A wireless access point (Tim got there first) is similar to a wireless router but without the router functions. The actual source(s) of interference however could be any number of co-located devices operating in, and saturating, the 2.4GHz spectrum.

From what we've measured, "significant" would be any point in time the interferer's energy is no less than 12dB below a XD-V70's carrier at the [XD-V70's] receive antenna. Of course, there has to be enough energy throughout the 2.4GHz spectrum to interfere with all four of a given XD-V70 carriers.
Logged
Henry Cohen

CP Communications    www.cpcomms.com
Radio Active Designs   www.radioactiverf.com

Frederik RosenkjŠr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 472
Re: line 6 digital microphones
« Reply #21 on: April 08, 2011, 09:52:26 pm »

Only problem with the interference hypothesis is that we have 16 systems - 3 handhelds and 13 beltpacks. All handhelds click, none of the beltpacks...
Logged
Affiliations: Danley Sound Labs, Yamaha (MI)

Daniel Cash

  • SR Forums
  • Newbie
  • *
  • Offline Offline
  • Posts: 38
  • Portland, OR
Re: line 6 digital microphones
« Reply #22 on: April 09, 2011, 02:23:15 pm »

Only problem with the interference hypothesis is that we have 16 systems - 3 handhelds and 13 beltpacks. All handhelds click, none of the beltpacks...

I didn't think it was possible to have more than 12 systems running simultaneously.  Are you assigning more than one wireless system to a given channel?
Logged

Frederik RosenkjŠr

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 472
Re: line 6 digital microphones
« Reply #23 on: April 11, 2011, 07:55:37 am »

I didn't think it was possible to have more than 12 systems running simultaneously.  Are you assigning more than one wireless system to a given channel?

It isn't - they aren't being used in the same time and/or place.
Logged
Affiliations: Danley Sound Labs, Yamaha (MI)

ProSoundWeb Community

Re: line 6 digital microphones
┬ź Reply #23 on: April 11, 2011, 07:55:37 am ┬╗


Pages: 1 2 [3]  All   Go Up
 



Page created in 0.056 seconds with 25 queries.