ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Danley TH 221, Powering?  (Read 2814 times)

Daniel Mock

  • Newbie
  • *
  • Offline Offline
  • Posts: 27
Danley TH 221, Powering?
« on: April 08, 2011, 03:53:23 pm »

I believe the TH 221 has two drivers
each 3000W program @ 4 ohms.

I was thinking of bridging two QSC PL 4.0s,
that would put 4000W @ 4 ohms in each driver.

would that be ok? thanks m8s
« Last Edit: April 08, 2011, 03:55:44 pm by Danmock »
Logged

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 20992
  • Wichita, Kansas USA
Re: Danley TH 221, Powering?
« Reply #1 on: April 08, 2011, 07:47:38 pm »

I believe the TH 221 has two drivers
each 3000W program @ 4 ohms.

I was thinking of bridging two QSC PL 4.0s,
that would put 4000W @ 4 ohms in each driver.

would that be ok? thanks m8s

Yes.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

Ivan Beaver

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 8968
  • Atlanta GA
Re: Danley TH 221, Powering?
« Reply #2 on: April 08, 2011, 08:47:23 pm »

I believe the TH 221 has two drivers
each 3000W program @ 4 ohms.

I was thinking of bridging two QSC PL 4.0s,
that would put 4000W @ 4 ohms in each driver.

would that be ok? thanks m8s

You need to change your name to your real name or the thread will get locked and deleted.

4000 watts is 1.2dB over the rated program power.

Of course the real question on whether it would be fine depends on the program material-how hard you push the amp-how much compression/limiting and so forth is being used etc.

It may be more than twice as much power as you should be using, or maybe even a little low.

It depends on your circumstances/music.
Logged
A complex question is easily answered by a simple-easy to understand WRONG answer!

Ivan Beaver
Danley Sound Labs

PHYSICS- NOT FADS!

ProSoundWeb Community

Re: Danley TH 221, Powering?
« Reply #2 on: April 08, 2011, 08:47:23 pm »


Pages: [1]   Go Up
 



Page created in 0.067 seconds with 22 queries.