Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Pro AV Forum
Projector Lumens vs screen size rules
Gus Housen:
I was wondering what projector sizes are usually recomended with certain sized screens Like 8ft, 10 ft, 12 ft Say in average ballroom ambient light ( I know the ambient light level plays into it Is there a good way to measure that as well to compare projectors?)
Andrew Welker:
--- Quote from: Gus Housen on April 07, 2011, 02:19:22 PM ---I was wondering what projector sizes are usually recomended with certain sized screens Like 8ft, 10 ft, 12 ft Say in average ballroom ambient light ( I know the ambient light level plays into it Is there a good way to measure that as well to compare projectors?)
--- End quote ---
When I'm designing a projector system, I typically aim for at least 50 foot-lamberts (lumens per square foot) on the screen. You can go lower than that if your ambient light on the screen is lower, but 50 is a good target to aim for.
Brad Weber:
--- Quote from: Gus Housen on April 07, 2011, 02:19:22 PM ---I was wondering what projector sizes are usually recomended with certain sized screens Like 8ft, 10 ft, 12 ft Say in average ballroom ambient light ( I know the ambient light level plays into it Is there a good way to measure that as well to compare projectors?)
--- End quote ---
The 'recommended' goal is a minimum 10:1 image contrast ratio, meaning the projected image brightness on the screen will be at least 10 times the brightness of the ambient light level on the screen. Many people get away with lower ratios, I've seen 5:1 and 3:1 examples in real life that were acceptable, but that also leaves little 'fudge factor' for aspects such as decreasing output as the projector lamp ages.
There can also be other details that can affect this such as the light loss of the lens if you're using anything other than a standard lens at it's optimal zoom or whether it is front or rear projection. The screen format can also be a factor if you are going by screen diagonal sizes as a 10' diagonal 4:3 format screen represents a different screen surface area than a 10' diagnonal 16:9 format screen. Related to that, the relationship of the projector format and screen format can be a factor, for example if you use a 4:3 format projector to fill a 16:9 format screen then 25% of the projected image, and thus also 25% of the overall projector brightness, is above and below the actual image on the screen.
Niels Hempel:
--- Quote from: Gus Housen on April 07, 2011, 02:19:22 PM ---I was wondering what projector sizes are usually recomended with certain sized screens Like 8ft, 10 ft, 12 ft Say in average ballroom ambient light ( I know the ambient light level plays into it Is there a good way to measure that as well to compare projectors?)
--- End quote ---
Projector Central (.com) has a "pro calculator" where you can choose what model projector you would like to use, then you can adjust projector distance to get the recommended screen size. Or, put in your screen size and it will give you the distance range.
Hope this helps!
Arnold B. Krueger:
--- Quote from: Gus Housen on April 07, 2011, 02:19:22 PM ---I was wondering what projector sizes are usually recomended with certain sized screens Like 8ft, 10 ft, 12 ft Say in average ballroom ambient light ( I know the ambient light level plays into it Is there a good way to measure that as well to compare projectors?)
--- End quote ---
Don't forget about ambient light. Is there such a thing as "typical" amvient light? I don't think so.
We use a 6000 lumen Panasonic 5500 projector with a screen that must be 20 foot diagonal with fairly high ambient light at times, and it just works. In fact I had to back off features like "digital brilliance" to keep a nice, easy-to-read presentation.
Navigation
[0] Message Index
[#] Next page
Go to full version