ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Antari Z1200 DMX wiring?  (Read 115 times)

MarcoPau

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Antari Z1200 DMX wiring?
« on: June 07, 2024, 03:46:06 AM »

Hiall, I have an old Antari Z1200 with B06523V3 board. I have always used it with a manual button that was wired to the pump and to the light that's saying if the machine is warm (long time ago hack done by someone else :-| ).

The XLR connectors for DMX are there but for some reason are not working. I suspect it's due to the hack that was done for the manual button, moving some cables on the terminal block.

Can anybody help re-establishing the proper wiring? It looks like there's only Z1200-II manuals on the web...

Thanks a bunch!
Logged

ProSoundWeb Community

Antari Z1200 DMX wiring?
« on: June 07, 2024, 03:46:06 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.024 seconds with 18 queries.