ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1] 2  All   Go Down

Author Topic: ID this connector?  (Read 2565 times)

Peter Kowalczyk

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
ID this connector?
« on: March 22, 2024, 03:44:23 AM »

Just did a site visit at a new-to-me events center, and they have a pair of these receptacles outside.  I've never seen them before; they don't appear to have a NEMA marking.  Has anyone used them? 
Logged

Mark McFarlane

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1946
Re: ID this connector?
« Reply #1 on: March 22, 2024, 05:30:26 AM »

Edit: The link below is similar but not a correct match. Sorry for posting this in a hurry and making a mistake.



https://www.capitalelectricsupply.com/product/detail/118689/hubbell-wiring-device-hbl460p12w
« Last Edit: March 22, 2024, 02:34:19 PM by Mark McFarlane »
Logged
Mark McFarlane

Chris Hindle

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 2740
  • Montreal, Quebec, Canada, Earth, Sol System,......
Re: ID this connector?
« Reply #2 on: March 22, 2024, 08:43:45 AM »

https://www.capitalelectricsupply.com/product/detail/118689/hubbell-wiring-device-hbl460p12w

Over 600 USD$ for ONE plug?
OK, it's a Hubble, but really?
Guess I need more, better customers to afford to add that to my Tye-In kit.....
Chris.
Logged
Ya, Whatever. Just throw a '57 on it, and get off my stage.

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3170
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: ID this connector?
« Reply #3 on: March 22, 2024, 09:24:26 AM »

The plug in the link is not the plug that mates to that receptical. The key ways and pin spacing looks wrong. That said I can't point you to the correct plug.

I actually have that Hubble pin sleeve plug that is in the link, found it on Ebay for far less, needed it for a series of jobs about 10 years ago and haven't used it since.
« Last Edit: March 22, 2024, 06:33:08 PM by Mike Caldwell »
Logged

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3562
    • HappyMac Digital Electronics
Re: ID this connector?
« Reply #5 on: March 23, 2024, 01:26:28 AM »

Over 600 USD$ for ONE plug?
OK, it's a Hubble, but really?
Guess I need more, better customers to afford to add that to my Tye-In kit.....
Chris.

When you need a waterproof connection, that what it costs.  And government LOVES to use those.  Different than the OP's connector though.
Logged
Brian Jojade

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3562
    • HappyMac Digital Electronics
« Last Edit: March 23, 2024, 01:34:02 AM by Brian Jojade »
Logged
Brian Jojade

Peter Kowalczyk

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 335
Re: ID this connector?
« Reply #7 on: March 26, 2024, 03:20:45 AM »

https://www.mroglobalsolutions.com/products/appleton-acr3044-600vac-30a-nsnp

Found it.

Wait, that was the 30 amp version.

Here's the 60 amp one.

https://www.amazon.com/Appleton-ACP6034BC-Metallic-Clamping-Ring/dp/B007QQSF4E

Thanks.  Seems pretty esoteric.  The facilities manager at the location said they'd never used them and didn't have any kind of breakout box to go with.  Sigh...
Logged

Mark McFarlane

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1946
Re: ID this connector?
« Reply #8 on: March 26, 2024, 06:03:33 AM »

Thanks.  Seems pretty esoteric.  The facilities manager at the location said they'd never used them and didn't have any kind of breakout box to go with.  Sigh...


I'd want to get multi-meter on this outlet, if you want to use it, before buying or building a bistro :).  If it's never been used it may not be live.
Logged
Mark McFarlane

Brian Jojade

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3562
    • HappyMac Digital Electronics
Re: ID this connector?
« Reply #9 on: March 26, 2024, 08:54:17 AM »


I'd want to get multi-meter on this outlet, if you want to use it, before buying or building a bistro :).  If it's never been used it may not be live.

ALWAYS meter new plugs, especially non standard ones.  You would be surprised how often even regularly used plugs are miswired.  It isn't often an issue when using just one, but when you use multiples in different areas things can go poof quickly.
Logged
Brian Jojade

ProSoundWeb Community

Re: ID this connector?
« Reply #9 on: March 26, 2024, 08:54:17 AM »


Pages: [1] 2  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.044 seconds with 19 queries.