ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Physical Line Inputs and Connector types for my Bogen IP Based Audio Dist.  (Read 566 times)

Mike Bellini

  • Newbie
  • *
  • Offline Offline
  • Posts: 1

I just purchased a complete BOGEN IP Based Audio Distribution system for my new Brew Pub and I am trying to understand how the Input Sources work.

From what I can tell, the C4060 power amps come with 4 line inputs using either 3-Pin Phoenix or a single Balanced RCA plug.  I would like to include a Pre-Amp device so I can easily switch between Bluetooth or other audio sources.

What I do not understand is how do I output from an audio source into this Bogen setup?  I make beer for a living so this is not my area of expertise at all.  I would expect to see (2) RCA plugs per input, Right and Left.  Or an Optical I/O like when I go from a DVD Player to a Receiver.  The links below are the BOGEN components I have.

NYQUIST Controller


BOGEN 4-Channel Power Amp


« Last Edit: February 04, 2024, 09:42:16 AM by bellinmi »
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7534
  • Audio Plumber
Posting Rules
« Reply #1 on: February 04, 2024, 10:51:40 AM »

I just purchased a complete BOGEN IP Based Audio Distribution system for my new Brew Pub and I am trying to understand how the Input Sources work.

Please go to your profile and change your displayed name to your real full name as required by the posting rules.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: February 04, 2024, 10:51:40 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.016 seconds with 21 queries.