ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Screws..  (Read 857 times)

Al Rettich

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 603
Screws..
« on: January 14, 2024, 06:36:30 PM »

Was fixing a couple of “bad” Behringer UMC 404 HD’s.  Putting them back together and my dog knocked off my magnetic bowl.  Lost three screws.  Took the one to Lowe’s, Home Depot, and Menards.. They couldn’t even tell me what size they were. 
Logged

Brian J Holder

  • Classic LAB
  • Newbie
  • *
  • Offline Offline
  • Posts: 11
Re: Screws..
« Reply #1 on: January 14, 2024, 06:46:31 PM »


Being Behringer they will be standard metric thread, either M3 or M2.5, you can get the length from one of the screws that you saved.
Brian
Logged

Steve-White

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1589
  • Fort Worth
Re: Screws..
« Reply #2 on: January 14, 2024, 08:09:52 PM »

Was fixing a couple of “bad” Behringer UMC 404 HD’s.  Putting them back together and my dog knocked off my magnetic bowl.  Lost three screws.  Took the one to Lowe’s, Home Depot, and Menards.. They couldn’t even tell me what size they were.

Hopefully poochie didn't get in trouble.  The flathead phillips in the back of the unit?

I have one here and can measure and locate suitable replacements for you.  Shouldn't be a big deal.  They are M3 with a thread pitch of 0.5mm.

Amazon Link M3
« Last Edit: January 14, 2024, 08:14:07 PM by Steve-White »
Logged

Mark McFarlane

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1946
Re: Screws..
« Reply #3 on: January 15, 2024, 08:49:32 AM »

Al,

A small hardware store (such as Ace) should have a 'sizing card' with all common thread sizes. Find the hole that your screw screws into and it will tell you the diameter and thread pitch.

I would never go to a big box store to source screws.
Logged
Mark McFarlane

Al Rettich

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 603
Re: Screws..
« Reply #4 on: January 15, 2024, 09:31:12 AM »

She got a bad doogie, but that’s was about it.  Like most of the country it’s frigid here so I decided to do this at home, in the heat! I’ll learn.  Thank you.
Hopefully poochie didn't get in trouble.  The flathead phillips in the back of the unit?

I have one here and can measure and locate suitable replacements for you.  Shouldn't be a big deal.  They are M3 with a thread pitch of 0.5mm.

Amazon Link M3
Logged

Martin Morris

  • Full Member
  • ***
  • Offline Offline
  • Posts: 157
Re: Screws..
« Reply #5 on: March 04, 2024, 02:08:38 AM »

Was fixing a couple of “bad” Behringer UMC 404 HD’s.  Putting them back together and my dog knocked off my magnetic bowl.  Lost three screws.  Took the one to Lowe’s, Home Depot, and Menards.. They couldn’t even tell me what size they were.

Al
Slight swerve - whats the issue with the UMC 404s?
I had a two channel UMC and had issues with the  drivers. Gave up trying in the end.

Cheers
Martin
Logged
Dude told me to "go back to where I came from", so I set my tent up on his front lawn ... (unnamed Indian)

ProSoundWeb Community

Re: Screws..
« Reply #5 on: March 04, 2024, 02:08:38 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.028 seconds with 20 queries.