ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Lightkey software conflict with Doug Fleenor  (Read 722 times)

Ysavel Medina

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Lightkey software conflict with Doug Fleenor
« on: January 15, 2024, 03:47:19 PM »

our church changed lighting control software to Lightkey App via usb on a imac and now we have intermittent problems with our Doug Fleenor wall switches not functioning. Our work around has been to: 1) shut down lightkey, restart lightkey and shutdown Lightkey again. If that doesn't work 2) unplug switches and usb cable, then reconnect switches and usb.  Between the two options, everything returns to working.  Both the imac and switches are at the start of the daisy chain. We understood with this configuration - 1) the imac should control the lights when the program was running and the switches would be inactive or 2) when the imac was off the Doug Fleenor switches would control the lights.  Most of the time 90%, this is true.  Any ideas how to get this to 100%?
Logged

Scott Hofmann

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 455
Re: Lightkey software conflict with Doug Fleenor
« Reply #1 on: January 15, 2024, 07:57:22 PM »

our church changed lighting control software to Lightkey App via usb on a imac and now we have intermittent problems with our Doug Fleenor wall switches not functioning. Our work around has been to: 1) shut down lightkey, restart lightkey and shutdown Lightkey again. If that doesn't work 2) unplug switches and usb cable, then reconnect switches and usb.  Between the two options, everything returns to working.  Both the imac and switches are at the start of the daisy chain. We understood with this configuration - 1) the imac should control the lights when the program was running and the switches would be inactive or 2) when the imac was off the Doug Fleenor switches would control the lights.  Most of the time 90%, this is true.  Any ideas how to get this to 100%?
The phrase "unplug switches and usb cable" makes me wonder how your daisy chain is configured. It should be usb/DMX interface to Fleenor switch 1 to Fleenor switch 2 to LED fixtures. I assume you have the Fleenor PRE10A units? If the Fleenors see DMX from the usb/DMX interface, they will continue being locked out. If you simply unplug the DMX cable from the usb/DMX interface, the Fleenors should take control. If they don't, you have probably not connected them correctly to begin with. Also, one of the Fleenors should be configured as "Slave" with the jumpers.
Logged
Scott Hofmann

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7617
  • Audio Plumber
Posting Rules
« Reply #2 on: January 15, 2024, 09:05:55 PM »

our church changed lighting control software to Lightkey App via usb on a imac and now we have intermittent problems with our Doug Fleenor wall switches not functioning. Our work around has been to: 1) shut down lightkey, restart lightkey and shutdown Lightkey again. If that doesn't work 2) unplug switches and usb cable, then reconnect switches and usb.  Between the two options, everything returns to working.  Both the imac and switches are at the start of the daisy chain. We understood with this configuration - 1) the imac should control the lights when the program was running and the switches would be inactive or 2) when the imac was off the Doug Fleenor switches would control the lights.  Most of the time 90%, this is true.  Any ideas how to get this to 100%?

Please go to your profile and change your displayed name to your real full name as required by the posting rules.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #2 on: January 15, 2024, 09:05:55 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.031 seconds with 21 queries.