Church and H.O.W. Forums for HOW Sound and AV - Your Displayed Name Must Be Your Real Full Name To Post In The Church and HOW Forums > Church Sound

Behringer X32 and Canon XA60

(1/2) > >>

Andy Yen:
Hi everyone,

What is best way to connect Behringer X32 to Canon XA60's XLR? I tried from phone out to XLR and does not work very well.

Any suggestions?

Thanks!

Mac Kerr:

--- Quote from: c4audio on November 19, 2023, 07:59:58 PM ---Hi everyone,

What is best way to connect Behringer X32 to Canon XA60's XLR? I tried from phone out to XLR and does not work very well.

Any suggestions?

Thanks!

--- End quote ---

Please go to your profile and change your name to your real full name as required by the posting rules.

Mac
admin

Dave Pluke:

--- Quote from: Andy Yen on November 19, 2023, 07:59:58 PM ---What is best way to connect Behringer X32 to Canon XA60's XLR?

--- End quote ---

Are you trying to get audio from the console into the camera? If so, just set up a separate AUX feed and go xlr to xlr.

Dave

Mike Caldwell:

--- Quote from: Dave Pluke on November 20, 2023, 09:00:36 AM ---Are you trying to get audio from the console into the camera? If so, just set up a separate AUX feed and go xlr to xlr.

Dave

--- End quote ---

Also you need to set the audio input to be line level on the camera when using the above connections.

What was it that did not work very well?

Jaspreet Singh:

--- Quote from: Andy Yen on November 19, 2023, 07:59:58 PM ---
Any suggestions?


--- End quote ---

We have a Soundcraft Si Impact and use a Behringer UMC202HD interface to get sound into an ipad. Maybe worth a shot

Navigation

[0] Message Index

[#] Next page

Go to full version