ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2] 3   Go Down

Author Topic: Mic stand adapter for mounting to box like on the RF Venue CP Beam  (Read 2017 times)

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2253
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #10 on: April 17, 2023, 06:29:33 PM »

Link?

I think I just called them and asked.  I don't remember how I ended up knowing I might be able to get them there, but we do have a pretty good relationship.
Logged

Brian Bolly

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 672
  • DC/Baltimore and other Major Airports
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #11 on: April 17, 2023, 07:32:37 PM »

I think I just called them and asked.  I don't remember how I ended up knowing I might be able to get them there, but we do have a pretty good relationship.

This one?

 https://www.professionalwireless.com/product/replacement-mounting-block/
Logged

Scott Helmke

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2253
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #12 on: April 17, 2023, 10:30:07 PM »

https://www.professionalwireless.com/product/replacement-mounting-block/

I'm not 100% sure, but it looks pretty close.  I don't think the A2003 is wide enough to fit both holes on one side.

-Scott
Logged

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2315
    • Check Check One Two
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3091
  • Covington, Ohio
    • Mike Caldwell Audio Productions
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #14 on: April 17, 2023, 10:53:29 PM »

Here's a company that makes all kinds of some what universal clamps and mounts.

https://www.camvate.com/

Like Rick mentioned a piece of hardware store aluminum angle and one those mic stand adapters would do the trick.

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2315
    • Check Check One Two
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #15 on: April 18, 2023, 12:28:00 AM »

Here's a company that makes all kinds of some what universal clamps and mounts.

https://www.camvate.com/

Like Rick mentioned a piece of hardware store aluminum angle and one those mic stand adapters would do the trick.


do you have a specific link to what I'm looking for?
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Mike Caldwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 3091
  • Covington, Ohio
    • Mike Caldwell Audio Productions

Rick Earl

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 492
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #17 on: April 18, 2023, 11:00:19 AM »

do you have a specific link to what I'm looking for?

Well, I can't seem to paste a link, but if you go to B&H and search Small Rig Cheese Bar, it should come up, it is about $12 and is threaded with a 3/8-16 as well as 1/4-20 holes on all sides.      This with the thread adapter should get you going for under $20.  I keep a few of these around for odds and ends of mounting. 

Logged

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2315
    • Check Check One Two
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #18 on: April 18, 2023, 11:00:56 AM »

Thank you, but the cp venue style block is really the best solution. Sadly, the company doesn’t seem to respond to emails, I’ll try calling when I get time.

Getting ahold of a actual person at most companies these days is harder than ever it seems…
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2315
    • Check Check One Two
Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #19 on: April 18, 2023, 11:03:44 AM »

Well, I can't seem to paste a link, but if you go to B&H and search Small Rig Cheese Bar, it should come up, it is about $12 and is threaded with a 3/8-16 as well as 1/4-20 holes on all sides.      This with the thread adapter should get you going for under $20.  I keep a few of these around for odds and ends of mounting. 


That looks great! Thank you very much!
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

ProSoundWeb Community

Re: Mic stand adapter for mounting to box like on the RF Venue CP Beam
« Reply #19 on: April 18, 2023, 11:03:44 AM »


Pages: 1 [2] 3   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.034 seconds with 24 queries.