ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: PRO 9 w/ DL431s  (Read 247 times)

Al Rettich

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 548
PRO 9 w/ DL431s
« on: March 29, 2023, 07:11:29 AM »

Have a client, who just purchased a pair of PRO 9's with three DL431's.  I know that each desk will have its preamp on the 431, but since each unit has 72 outputs does that mean each desk will have a set of 24 outputs as well? Trying to figure out where the outputs would be coming from.
Logged

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2209
    • Check Check One Two
Re: PRO 9 w/ DL431s
« Reply #1 on: March 29, 2023, 07:41:31 AM »

Hey Al;

The DL431 is preamps only. All the outputs are fed from the internal preamps. Designed for a time when there was more analog than digital.
The device your client should have gotten is the DL231 which also has 24 inputs and 48 preamps (one for each console) but also has 24 outputs that can be sent signals from either of the connected consoles.
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

ProSoundWeb Community

Re: PRO 9 w/ DL431s
« Reply #1 on: March 29, 2023, 07:41:31 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.032 seconds with 22 queries.