Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Scott Helmke]

Does anybody have an RS-502, ideally RS-522 (the TW version, right?) schematic they could share with me? 

I've got one of those old packs with a weird distortion problem, and we're well into the "grudge troubleshooting" phase of the repair.  I do have an RS-501 schematic which covers most of the same ground, but I think I've got a problem where the mic splits into the two different channels.

[Ike Zimbel]

Does anybody have an RS-502, ideally RS-522 (the TW version, right?) schematic they could share with me? 

I've got one of those old packs with a weird distortion problem, and we're well into the "grudge troubleshooting" phase of the repair.  I do have an RS-501 schematic which covers most of the same ground, but I think I've got a problem where the mic splits into the two different channels.

I may have it, will try and look in the next few days. I definitely have some parts for that vintage of Clear-Com product, including two of the OEM, un-obtanium, 20-pin IC that is the heart of the RS-5xx series belt packs. If anyone is still using that series of Clear-Com, please reach out as I'm looking to part with my parts.

[Scott Helmke]

I may have it, will try and look in the next few days. I definitely have some parts for that vintage of Clear-Com product, including two of the OEM, un-obtanium, 20-pin IC that is the heart of the RS-5xx series belt packs. If anyone is still using that series of Clear-Com, please reach out as I'm looking to part with my parts.

Thanks for looking for the schematic!

I'm definitely interested in parts, I've had to give up on at least a couple of packs because of that chip.

[ProSoundWeb Community]