Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Lighting Forum

Light tree case??

(1/2) > >>

Mike Monte:
I have made the jump from par38 cans to LED lights...

The above being said, I now need to transport them to/from gigs without dinging-them-up.

I have bags that I have used for years with my par cans but would like to get something a bit more sturdy as the LED mounting brackets are not as robust as par can brackets.
Specifically: I want to leave the lights permanently attached to the crossbar.  Once a gig has ended, remove the crossbar fro the top of the light stand and place the bar (with lights attached) in a case.
I have four lights attached to each crossbar.)

I am not looking for road-worthy cases as I only do local stuff.....  Maybe something SKB'ish or similar.
I've done some searching online and have come up short...

Any recommendations.

 

Jeff Lelko:
Hi Mike,

I think you’ll find that most weekend warriors here opt for the soft padded keyboard cases for what you describe.  Of course you can buy a rigid keyboard case if you want a bit more protection instead. 

SKB also makes plastic ATA cases for golf clubs that will work if your light trees need more space than what a keyboard case permits.  Hope this helps!

Debbie Dunkley:
Yep - as Jeff says, a keyboard case is what you need. I've been using them for years and encouraged others to do so with success.

boburtz:

--- Quote from: Mike Monte on December 10, 2022, 07:31:11 AM ---I have made the jump from par38 cans to LED lights...
Specifically: I want to leave the lights permanently attached to the crossbar.  Once a gig has ended, remove the crossbar fro the top of the light stand and place the bar (with lights attached) in a case.
I have four lights attached to each crossbar.)
...
Any recommendations.

--- End quote ---
I have always found the light bar to be large and inefficient for packing. I ended up configuring the light bar in a square configuration, two over two, so now it's half the length and capable of being packed with other, similarly sized items. The lights stay on the bar in the case. Blizzard wicycle stays on the lights (these are Blizzard RokBox, so the wicycle is powered directly from the fixture). All you do is put them on a pole (or stand), plug them into power and aim them. Super fast.

Debbie Dunkley:

--- Quote from: boburtz on December 10, 2022, 01:47:37 PM ---I have always found the light bar to be large and inefficient for packing. I ended up configuring the light bar in a square configuration, two over two, so now it's half the length and capable of being packed with other, similarly sized items. The lights stay on the bar in the case. Blizzard wicycle stays on the lights (these are Blizzard RokBox, so the wicycle is powered directly from the fixture). All you do is put them on a pole (or stand), plug them into power and aim them. Super fast.

--- End quote ---
I like this and it makes sense for packing .... However, I find the length of a T bar helps to get the light where I want it. When used as front lighting it is impossible to place the stands in front of the stage. So, I get the tripod as far out front as I can keeping to the sides of course and using a 48" ish length allows for an adjacent placement twisting the lights toward the band with farthest light to the front and perhaps the one next to it  in front of the band - I find there are less shadows on the faces that way.
I use my pars (usually) for front lighting and my effects and spots on my truss at the back.

Navigation

[0] Message Index

[#] Next page