ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Identify this terminal block  (Read 120 times)

Patrick Tracy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2455
    • Boulder Sound Guy
Identify this terminal block
« on: November 21, 2022, 05:51:50 PM »

I have an old Stewart PA-50 (NOT a PA-50B) with a removeable terminal block. The screw clamps aren't working properly so I thought I'd find a replacement. In general, it's a lot like many Phoenix connectors, but it uses blades that slide between sprung teeth rather than sockets and pins. I haven't had luck finding the correct replacement so I thought I'd see if anyone here recognized it. For reference, the block is about 20mm wide. See the photos.
« Last Edit: November 21, 2022, 06:31:01 PM by Patrick Tracy »
Logged

Patrick Tracy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2455
    • Boulder Sound Guy
Re: Identify this terminal block
« Reply #1 on: November 21, 2022, 05:52:41 PM »

More photos.

Patrick Tracy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2455
    • Boulder Sound Guy
Re: Identify this terminal block
« Reply #2 on: November 21, 2022, 05:53:09 PM »

One more photo.

Patrick Tracy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2455
    • Boulder Sound Guy
Re: Identify this terminal block
« Reply #3 on: November 21, 2022, 05:58:24 PM »

Wow, Stewart got back to me super fast. It's a Lumberg part # KSC-04.

ProSoundWeb Community

Re: Identify this terminal block
« Reply #3 on: November 21, 2022, 05:58:24 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.014 seconds with 20 queries.