Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Installed Sound/Contracting
Identify this terminal block
(1/1)
Patrick Tracy:
I have an old Stewart PA-50 (NOT a PA-50B) with a removeable terminal block. The screw clamps aren't working properly so I thought I'd find a replacement. In general, it's a lot like many Phoenix connectors, but it uses blades that slide between sprung teeth rather than sockets and pins. I haven't had luck finding the correct replacement so I thought I'd see if anyone here recognized it. For reference, the block is about 20mm wide. See the photos.
Patrick Tracy:
More photos.
Patrick Tracy:
One more photo.
Patrick Tracy:
Wow, Stewart got back to me super fast. It's a Lumberg part # KSC-04.
Navigation
[0] Message Index
Go to full version