ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Wireless control and Dante networks  (Read 1354 times)

Russell Ault

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1969
  • Edmonton, AB
Re: Wireless control and Dante networks
« Reply #20 on: September 25, 2022, 05:01:38 PM »

I do this sort of thing all the time combining control and Dante networks over the same "broadcast domain". Like all things networking, there is a time and a place, but yes this can work just fine and is sometimes preferable to a more complicated configuration...

My impression is that most of the arguments again subnets sharing an Ethernet broadcast domain fall under the heading of "IT departments' fanatical obsession with preventing malicious activity" (subtitled "network security considerations that most production networks blithely ignore"). Properly-configured VLANs are very nearly air-gapped, while dividing traffic merely a the Layer 3 level opens the door to "ooh, now let's see what this IP address will let me talk to!", but that's (usually) much less of a consideration for our purposes.

-Russ
Logged

ProSoundWeb Community

Re: Wireless control and Dante networks
« Reply #20 on: September 25, 2022, 05:01:38 PM »


Pages: 1 2 [3]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.039 seconds with 22 queries.