Hello, I need some help and insight from y’all cause I’m a little confused right now. We have a Behringer X32 compact with a Behringer s32 stage box. The issue we’re running into is it’s making a extremely loads popping noise about half an hour after start up. Catch is it makes the noise only once at initial startup and then doesn’t do it anymore. If you shit it down and restart it without leaving it off long enough to let it cool down, it won’t do it. Also, it only does it if you’re using the monitors. If the monitors are off or muted it won’t do it. It acts as if something resets. You lose all control of everything and looks almost like the mixer reboots (every light on the board lights up) but it never shuts off. Any ideas?
