ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: "Full screen" appears not to be full screen  (Read 484 times)

Stephen Swaffer

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2582
"Full screen" appears not to be full screen
« on: July 13, 2022, 12:41:56 PM »

We have a Mac mini connected to an Epson Laser projector using HDbaseT.  I am not sure of the specific model.  We typically use ProPresenter for media. We have the mini configured with 3 "monitors" one of which is the projector.  I do not understand ow, when we setup the projector using on board test screens, the projector fills the screen properly.  Then, if I take a window to the projector and go full screen it fills the screen as expected.  That all seems normal-but then I have some pictures-or this last week a cell phone video that I converted from .wmv to .mp4 to use in PP-that will splash above and below the screen.  How is this even possible?
Logged
Steve Swaffer

Glen Kelley

  • Full Member
  • ***
  • Offline Offline
  • Posts: 122
  • El Paso, TX
    • The University of Texas at El Paso
Re: "Full screen" appears not to be full screen
« Reply #1 on: July 14, 2022, 12:32:59 PM »

How is this even possible?

Does the projector aspect setting match the native aspect ratio of your projector, and do those match the aspect ratio of the screen? My guess is that your projection screen is 16:9, and the projector is set to display 16:9, but the native aspect ratio of the projector is 16:10 (usually called "wide").
Logged

ProSoundWeb Community

Re: "Full screen" appears not to be full screen
« Reply #1 on: July 14, 2022, 12:32:59 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.035 seconds with 20 queries.