Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Installed Sound/Contracting

x32 midal dl32

(1/2) > >>

Stefano Brigliadori:
Hi, can I directly connect X32 with Midas DL32 through AES50 to manage the stage box without Dante interface?

Doug Fowler:
Read the rules, fix your display name.

Thank you for your cooperation.

Gunther Mai:

--- Quote from: Stefano Brigliadori on May 12, 2022, 05:46:34 AM ---Hi, can I directly connect X32 with Midas DL32 through AES50 to manage the stage box without Dante interface?

--- End quote ---
Yes, no problem. Must be done via standard AES50 wiring and routing. No DANTE.

Chrysander 'C.R.' Young:

--- Quote from: Gunther Mai on June 06, 2022, 12:47:42 AM ---Yes, no problem. Must be done via standard AES50 wiring and routing. No DANTE.

--- End quote ---

Correct, with a few minor additions as per the manufacturer:
- Must be Cat5e STP
- Must use Neutrik Ethercons on each end
- Shield must be bonded to the shell on each end
- No more than 100m

Paul Johnson:
However, if you haven't read the manufacturer info - ordinary RJ45 Cat 5 with no shield works fine for me up to 50m (as that is the length of the ones I have used for years. The screened, expensive one on the reel rarely gets an outing. The others are cheap enough I leave them in the theatres I work in repeatedly - just laying in the roof space. One should never discount manufacturers advice - when you know about it, I didn't!

Navigation

[0] Message Index

[#] Next page