ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Connecting mixer to sub to amp  (Read 699 times)

Jeff Frick

  • Newbie
  • *
  • Offline Offline
  • Posts: 1
Connecting mixer to sub to amp
« on: May 09, 2022, 03:10:57 PM »

Hello, we have a Behringer QX1832USB mixer and I'm short on outputs from the mixer. I'd like to connect Main Outs from the mixer to an Alto TS315S Subwoofer. My speakers are passive so I'd like to connect the outputs from the sub to our Crown power amp. Is that safe? The sub has two inputs and two outputs - does that mean they're separate signals (stereo). 
Logged

Patrick Tracy

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2455
    • Boulder Sound Guy
Re: Connecting mixer to sub to amp
« Reply #1 on: May 09, 2022, 05:26:43 PM »

That should be fine. I'm pretty sure the two inputs/outputs stay separated for stereo operation, but reading the manual would be a way to confirm that. The sub has six output modes, four for specific Alto speakers, one generic high pass and one full range. I'd probably try the generic high pass.

ProSoundWeb Community

Re: Connecting mixer to sub to amp
« Reply #1 on: May 09, 2022, 05:26:43 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.034 seconds with 19 queries.