Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Console Connectivity Solutions

Yamaha TF3 Editor connectivity with Dante and Standard Network

(1/1)

Raytango19:
Greetings!

I have a TF3 on a dedicated Dante Network. I would like to use the other network port to connect to a second network to utilize TF Editor. Not sure if that possible. Or maybe is it possible to use TF Editor through the Dante Network? Any thoughts would be appreciated.

I need to have the console on the Dante Network. Which uses a Dante Network Port.  Can I use the Standard Network port for for another network to connect TF Editor too the console. Or can this be done via the Dante Network. I know Dante doesn't do wireless either so that's why I would want to connect the Standard port. Another thought can this be managed on Dante Domain Manger maybe?

Mac Kerr:

--- Quote from: Raytango19 on April 20, 2022, 02:27:35 PM ---Greetings!

I have a TF3 on a dedicated Dante Network.


--- End quote ---

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin

Navigation

[0] Message Index

Go to full version