ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Yamaha TF3 Editor connectivity with Dante and Standard Network  (Read 541 times)

Raytango19

  • Newbie
  • *
  • Offline Offline
  • Posts: 1

Greetings!

I have a TF3 on a dedicated Dante Network. I would like to use the other network port to connect to a second network to utilize TF Editor. Not sure if that possible. Or maybe is it possible to use TF Editor through the Dante Network? Any thoughts would be appreciated.

I need to have the console on the Dante Network. Which uses a Dante Network Port.  Can I use the Standard Network port for for another network to connect TF Editor too the console. Or can this be done via the Dante Network. I know Dante doesn't do wireless either so that's why I would want to connect the Standard port. Another thought can this be managed on Dante Domain Manger maybe?
Logged

Mac Kerr

  • Old enough to know better
  • Administrator
  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7286
  • Audio Plumber
Posting Rules
« Reply #1 on: April 20, 2022, 04:44:35 PM »

Greetings!

I have a TF3 on a dedicated Dante Network.


Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin
Logged

ProSoundWeb Community

Posting Rules
« Reply #1 on: April 20, 2022, 04:44:35 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.038 seconds with 20 queries.