ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: Lake LM 26 Help - Configuring the I/O and Crossovers  (Read 3409 times)

Jon Perrelly

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #10 on: December 20, 2021, 10:54:58 PM »

Nevermind I got it! You have to create the crossover out of the HP and LP filters and just tighten them up into a single band pass.

Why does the green sometimes leave the inside of the dome / bandpass lines? What does that mean and how do I get rid of it?

« Last Edit: December 20, 2021, 11:39:09 PM by Jon Perrelly »
Logged

Peter Morris

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1467
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #11 on: December 21, 2021, 04:17:32 PM »

Nevermind I got it! You have to create the crossover out of the HP and LP filters and just tighten them up into a single band pass.

Why does the green sometimes leave the inside of the dome / bandpass lines? What does that mean and how do I get rid of it?

No quite sure what you are asking ... perhaps this screen shot will help.

The green indicates the pass band you have selected or are working on.  In this case the 90Hz LP
« Last Edit: December 21, 2021, 04:20:10 PM by Peter Morris »
Logged

Jon Perrelly

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #12 on: December 21, 2021, 09:20:34 PM »

No quite sure what you are asking ... perhaps this screen shot will help.

The green indicates the pass band you have selected or are working on.  In this case the 90Hz LP

Yes that's what I meant. So it represents the pass band you're messing with but does not allow the audio information to leave the crossover you design.

I'm pretty much there now, just need to work on saving and recalling systems.

Thanks Peter!
Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7566
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #13 on: December 22, 2021, 10:43:59 PM »

A) I don't think you know what you're dealing with here
B) I really like that - welcome to the forums

Scott "Welcome Wagon" von Helmholtzman - evolving - I know Tim will be proud.  :)

He is rumored to actually "resonate" from time to time...


Hey, I was actually nice and made no assumptions and just generic suggestions based on other processors I am familiar with.  The hz thing was a joke. 


He clearly does know what he is doing, now I am surprised he couldn't just yolo the processor but Peter's post was very helpful. 



Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Steve-White

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1593
  • Fort Worth
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #14 on: December 22, 2021, 11:12:24 PM »


Hey, I was actually nice and made no assumptions and just generic suggestions based on other processors I am familiar with.  The hz thing was a joke. 

He clearly does know what he is doing, now I am surprised he couldn't just yolo the processor but Peter's post was very helpful.

Why yes you were, and of course he does.  I was just playing with Tim's "I see the Welcome Wagon has found you" post from a while back.

Yes the HZ thing was a joke and I saw the opportunity to expand upon it a bit.  JK amigo :)
Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 7566
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #15 on: December 25, 2021, 11:35:32 PM »

Why yes you were, and of course he does.  I was just playing with Tim's "I see the Welcome Wagon has found you" post from a while back.

Yes the HZ thing was a joke and I saw the opportunity to expand upon it a bit.  JK amigo :)


It's all good I don't want to get a reputation for unsolicited attacks.  Relatively I am still a new guy. 

Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Jon Perrelly

  • Newbie
  • *
  • Offline Offline
  • Posts: 7
Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #16 on: January 28, 2022, 10:11:54 AM »


It's all good I don't want to get a reputation for unsolicited attacks.  Relatively I am still a new guy.

No offense taken!
Logged

ProSoundWeb Community

Re: Lake LM 26 Help - Configuring the I/O and Crossovers
« Reply #16 on: January 28, 2022, 10:11:54 AM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.038 seconds with 22 queries.