ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: FS: Speaker Covers  (Read 306 times)

Brian Bolly

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 597
  • Homeward Bound
FS: Speaker Covers
« on: October 19, 2021, 01:27:05 PM »

A couple pairs of covers I've had sitting in my shop and they are no longer needed. 

You pay shipping.  Make me an offer!

Pair #1
- Under Cover FS/W series
- Has the water-resistant scrim for the face, and a flap to flip over it to cover the face
- Has a couple straps to go under the wedges as well
- Has a single handle cutout/flap on the left side
- For a stage monitor of unknown mfg/model - Turbosound? db Tech? Not sure.
- Seriously.  I don't know how these ended up in my shop.
- Dims: About 23" wide, 12" deep and 11" high at the peak.  Not sure how to best/accurately measure it - see photo link below for details

https://imgur.com/6u3EqVA
https://imgur.com/T1rg41N
https://imgur.com/wpdxdIh
https://imgur.com/tvr0HA6

Pair #2
- "Moving Blanket" style
- Originally sized to fit a Meyer Sound UPQ-1P (or UPQ-D1/D2/D3)
- Top panel is ~18" wide at front, ~9" wide at rear, and about 18.5" deep
- Overall height is ~28"
- Fair condition.  Some snags and pulls, mostly on the top.  But, better than nothing!

https://imgur.com/ab6xncJ
https://imgur.com/4D8Vd6n
https://imgur.com/HvYxj7F
https://imgur.com/lHAXh5f



Logged

ProSoundWeb Community

FS: Speaker Covers
« on: October 19, 2021, 01:27:05 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.025 seconds with 19 queries.