ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]   Go Down

Author Topic: DSR-112 as top on 2 x 18  (Read 2413 times)

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6741
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: DSR-112 as top on 2 x 18
« Reply #20 on: October 17, 2021, 07:37:49 PM »

except for my KW-181's the out is full range...


I don't know if you have any x/m-32 product but you can use the matrix as a crossover and it has a good selection of filter types.  I have found that it is beyond the abilities of many of our techs and it makes them uncomfortable.  However it works great.  I am sure some of the other boards have it I think I have seen comments on the A&H low end, I know the Advantis does not. 


Another option I have found that tech's are comfortable with it is the LCR on the X/M-32 they use the C out for the subs.  You always can burn a mixbus for aux fed.

Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

Mal Brown

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1191
Re: DSR-112 as top on 2 x 18
« Reply #21 on: October 17, 2021, 11:52:38 PM »

I'm all Soundcraft though.  Have Matrixes but not filters...
Logged
Bass player, sound guy.
Fb Gorge Sound and Light
WillyandNelson.com

Mark Scrivener

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 283
    • My Recording Studio
Re: DSR-112 as top on 2 x 18
« Reply #22 on: October 18, 2021, 04:05:06 AM »

I'm all Soundcraft though.  Have Matrixes but not filters...

The Ui24R has basic HP and LP filters on all the outputs which can be set with 1Hz resolution, but no way to change slope (not even sure what the slope is for these).

Mal Brown

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1191
Re: DSR-112 as top on 2 x 18
« Reply #23 on: October 18, 2021, 11:04:57 AM »

Exactly.   The channels hve selectable slopes up to 36db/oct.   Not available on the outputs though and the slopes are fairly shallow by appearance.  Maybe 6 db /octave ?
Logged
Bass player, sound guy.
Fb Gorge Sound and Light
WillyandNelson.com

Scott Bolt

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1618
Re: DSR-112 as top on 2 x 18
« Reply #24 on: October 19, 2021, 10:28:20 PM »

except for my KW-181's the out is full range...
Sadly true :(.  Not sure what QSC product management was thinking here.
Logged

ProSoundWeb Community

Re: DSR-112 as top on 2 x 18
« Reply #24 on: October 19, 2021, 10:28:20 PM »


Pages: 1 2 [3]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.029 seconds with 21 queries.