Sound Reinforcement - Forums for Live Sound Professionals - Your Displayed Name Must Be Your Real Full Name To Post In The Live Sound Forums > Lighting Forum

Looking for 1-1/2" Trigger clamp

(1/7) > >>

Debbie Dunkley:
I am having a heck of a time finding something.
I have a 10ft light duty truss that I use supported by 2 strong tripods. I don't have much weight on it but I can provide a decent little light show on smaller stages - quickly and easily deployed.
It has 1-1/2" shafts and I have been using ADJ O clamps on it. They are more than capable of doing what I want them to do but every time I use them, I pinch my fingers. I'd like to get a C clamp/trigger clamp style instead but for the life of me I cannot find anything in 1-1/2". The hook would also allow me to have the truss take the weight of the fixture whilst I tighten the clamp.
I just had delivered a set of nice looking black C clamps advertised at 1.5" minimum fit but as soon as I opened the package I could see they were too big - and this is what I am finding. These were incorrectly advertised and will have to be returned. I was so happy to find what i thought would fit but ....alas no.

So, does anyone know where I can find 1-1/2" C clamps?

Like this:

Trigger Clamp

Caleb Dueck:
https://www.thelightsource.com/products/mini-clamp-20

Like this?

Debbie Dunkley:

--- Quote from: Caleb Dueck on October 15, 2021, 09:00:10 PM ---https://www.thelightsource.com/products/mini-clamp-20

Like this?

--- End quote ---
Thanks Caleb ...but  no I hate that design - it chews away at the truss and ruins it. I want the type that just tightens to the bar. Ironically I can find the style you link too and the O clamp in 1.5" but I cannot find Trigger clamps, Quick Rig clamps or  Quick Release 'O' clamps - any of which I prefer and would choose.

Scott Hofmann:
Check out the complete line of "Claws" from The Light Source: https://www.thelightsource.com/products/
They are extremely helpful folks so give them a call or email and I'm sure they can fix you up. You'll have to order from one of their dealers.

Debbie Dunkley:

--- Quote from: Scott Hofmann on October 16, 2021, 12:11:43 AM ---Check out the complete line of "Claws" from The Light Source: https://www.thelightsource.com/products/
They are extremely helpful folks so give them a call or email and I'm sure they can fix you up. You'll have to order from one of their dealers.

--- End quote ---

Thanks Scott... I'll look into this  - these are exactly the type of clamps I need and according to their website they seem to offer the 1.5" versions!!

Navigation

[0] Message Index

[#] Next page

Go to full version