ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 2 [3]  All   Go Down

Author Topic: Building a rack...  (Read 1124 times)

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1958
  • Niceville, FL
    • Nailed Productions
Re: Building a rack...
« Reply #20 on: October 13, 2021, 05:58:14 PM »

If there's a screw near the IEC inlet grab a zip tie with a screw hole and a longer screw and zip the IEC down.
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Tim McCulloch

  • SR Forums
  • Hero Member
  • *
  • Offline Offline
  • Posts: 22236
  • Wichita, Kansas USA
Re: Building a rack...
« Reply #21 on: October 13, 2021, 06:54:18 PM »

https://www.walmart.com/ip/5X-Brand-New-No-09C9658-Qualtek-Electronics-730-00-00-Iec-Plug-Retainer/613409549

Surely Walmart will still let you in the front door. . .

Wally did, and for some reason the Newark site works just fine today.  Crown uses the same kind of connector retainer on their I-Tech amps.
Logged
"Practicing an art, no matter how well or badly, is a way to make your soul grow, for heaven's sake. Sing in the shower. Dance to the radio. Tell stories. Write a poem to a friend, even a lousy poem. Do it as well as you possible can. You will get an enormous reward. You will have created something."  - Kurt Vonnegut

ProSoundWeb Community

Re: Building a rack...
« Reply #21 on: October 13, 2021, 06:54:18 PM »


Pages: 1 2 [3]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.045 seconds with 16 queries.