ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: 1 [2]  All   Go Down

Author Topic: bEHRINGER x32 RACK Not booting  (Read 2172 times)

Jorge Ramos

  • Newbie
  • *
  • Offline Offline
  • Posts: 5
Re: bEHRINGER x32 RACK Not booting
« Reply #10 on: October 18, 2021, 07:00:08 PM »

have you reached out on the musictribe behringer site.  ,,,    Or put a new blank card  formated as fat or fat32.   not ntfs. 
then run a bios update from the usb and thumb drive ???


Thank you Jerome Malsack, for the tips.

All the Best.
Best Regards
Logged

Kevin Maxwell

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1569
Re: bEHRINGER x32 RACK Not booting
« Reply #11 on: October 19, 2021, 09:20:54 AM »

Sorry Kevin Maxwell
to disturb you and take your time.

Best regards

I don't know if this is a language barrier but if you read my post and understand it I am asking Scott why not help you.
Logged

Christopher Greco

  • Newbie
  • *
  • Offline Offline
  • Posts: 14
Re: bEHRINGER x32 RACK Not booting
« Reply #12 on: November 10, 2021, 07:24:39 AM »

Hi
Sorry to disturb. I'm new here and I have a question about Behringer X32 Rack that I own and suddenly did not boot. I have replace several capacitors and the voltages I think they are ok ( because they were a little lower than should). Now I think the microSd card in the MCU is corrupted. I tried to analyse in a Linux system and nothing .Could someone tell me something?
Thank in advance
Regards
J.C.

Had the same issue with mine, I replaced all the electrolytic caps on the power supply and that was 2 years ago. Still working like a charm, although I hope I just didn't shoot myself in the foot.
Logged

ProSoundWeb Community

Re: bEHRINGER x32 RACK Not booting
« Reply #12 on: November 10, 2021, 07:24:39 AM »


Pages: 1 [2]  All   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 21 queries.