Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jorge Ramos]

have you reached out on the musictribe behringer site.  ,,,    Or put a new blank card  formated as fat or fat32.   not ntfs. 
then run a bios update from the usb and thumb drive

Thank you Jerome Malsack, for the tips.

All the Best.
Best Regards

[Kevin Maxwell]

Sorry Kevin Maxwell
to disturb you and take your time.

Best regards

I don't know if this is a language barrier but if you read my post and understand it I am asking Scott why not help you.

[Christopher Greco]

Hi
Sorry to disturb. I'm new here and I have a question about Behringer X32 Rack that I own and suddenly did not boot. I have replace several capacitors and the voltages I think they are ok ( because they were a little lower than should). Now I think the microSd card in the MCU is corrupted. I tried to analyse in a Linux system and nothing .Could someone tell me something?
Thank in advance
Regards
J.C.

Had the same issue with mine, I replaced all the electrolytic caps on the power supply and that was 2 years ago. Still working like a charm, although I hope I just didn't shoot myself in the foot.

[ProSoundWeb Community]