Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Jorge Ramos]

Hi
Sorry to disturb. I'm new here and I have a question about Behringer X32 Rack that I own and suddenly did not boot. I have replace several capacitors and the voltages I think they are ok ( because they were a little lower than should). Now I think the microSd card in the MCU is corrupted. I tried to analyse in a Linux system and nothing .Could someone tell me something?
Thank in advance
Regards
J.C.

[Mac Kerr]

Hi
Sorry to disturb. I'm new here

Thank in advance
Regards
J.C.

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin

[Brian Jojade]

Hi
Sorry to disturb. I'm new here and I have a question about Behringer X32 Rack that I own and suddenly did not boot.

Good etiquette for online forums is to create a new thread when you want to discuss an unrelated problem to the original post.  Makes it easier for everyone to follow along that way.

[Daniel Levi]

AFAIK the X32 is not based on Linux but their own OS which may make analysis more difficult.

[Jorge Ramos]

AFAIK the X32 is not based on Linux but their own OS which may make analysis more difficult.

[Jorge Ramos]

Hi Daniel Levi, thank you for your post. I know that OS  from X32 rack is not based on Linux, I only said that because i need to verify the microSD card ( located in MCU board) is or not corrupted and the data inside. I don´t have money to buy a nem one, I'm trying to achieve a new microSD  card with original data to test the Rack.Thank you for your time,

[Jerome Malsack]

have you reached out on the musictribe behringer site.  ,,,    Or put a new blank card  formated as fat or fat32.   not ntfs. 
then run a bios update from the usb and thumb drive  

[Scott Holtzman]

Hi
Sorry to disturb. I'm new here and I have a question about Behringer X32 Rack that I own and suddenly did not boot. I have replace several capacitors and the voltages I think they are ok ( because they were a little lower than should). Now I think the microSd card in the MCU is corrupted. I tried to analyse in a Linux system and nothing .Could someone tell me something?
Thank in advance
Regards
J.C.

Hi realizing that you are new here why do you think this is a Behringer support site, or any kind of support site?

[Kevin Maxwell]

Hi realizing that you are new here why do you think this is a Behringer support site, or any kind of support site?

Are we not here to help each other and to get help when we need it? Is that not support? It does seem a bit weird that he is dissembling the X32Rack and randomly changing things. But if someone knows the answer to his questions why not help him? I am no able to help him.

Your reply to him surprises me.   

[Jorge Ramos]

Sorry Kevin Maxwell
to disturb you and take your time.

Best regards

[Jorge Ramos]

have you reached out on the musictribe behringer site.  ,,,    Or put a new blank card  formated as fat or fat32.   not ntfs. 
then run a bios update from the usb and thumb drive

Thank you Jerome Malsack, for the tips.

All the Best.
Best Regards

[Kevin Maxwell]

Sorry Kevin Maxwell
to disturb you and take your time.

Best regards

I don't know if this is a language barrier but if you read my post and understand it I am asking Scott why not help you.

[Christopher Greco]

Hi
Sorry to disturb. I'm new here and I have a question about Behringer X32 Rack that I own and suddenly did not boot. I have replace several capacitors and the voltages I think they are ok ( because they were a little lower than should). Now I think the microSd card in the MCU is corrupted. I tried to analyse in a Linux system and nothing .Could someone tell me something?
Thank in advance
Regards
J.C.

Had the same issue with mine, I replaced all the electrolytic caps on the power supply and that was 2 years ago. Still working like a charm, although I hope I just didn't shoot myself in the foot.

[ProSoundWeb Community]