ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: A&H dLive version 1.9 is out  (Read 575 times)

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1934
  • Niceville, FL
    • Nailed Productions
A&H dLive version 1.9 is out
« on: September 14, 2021, 09:04:35 AM »

Introduction to 1.9
https://www.youtube.com/watch?v=pLjMb6C5Ofc

Main Features:
  • Source Expander, Dual Treshold Expander and Bus compressor DEEP models
  • NEQ swap any GEQ for a 12-band PEQ
  • New, comprehensive RTA and sonogram tools
  • Integration with Sennheiser wireless microphones
  • Gain sharing across dLive MixRacks
  • and quite a lot more.

Source Expander(s)
  • Reduce bleed and increase gain-before-feedback
  • Enhance vocal performances
  • Clean up drum channels without losing ambience
  • Minimise the risk of feedback during live performances
  • Simple two-knob control for "set and forget" operation
  • Three speed settings

Sennheiser Integration
  • Compatible with:
    -300 (G3/G4)
    -500 (G3/G4)
    -2000
    -2050
  • Connect up to 50 supported receivers (50-200 wireless channels)
  • Auto-detect feature for plug and play operation
  • One screen overview of connected Sennheiser devices
  • Quickly associate Sennheiser wireless channels with dLive inputs
  • Bank view shows priority information:
    -Battery level
    -RF Strength
    -Audio signal level
  • Control Sennheiser receiver parameters from dLive:
    -Receiver gain (up/down)
    -Receiver mute
    -Locate receiver
  • Key information on Preamp page:
    -RF signal strength
    -Battery level
    -Audio signal level
    -Audio signal peak
    -Mute (receiver)

NEQ12 (12 band PEQ for mixes)
  • Swap any GEQ for NEQ
  • Perfect for crafting IEM mixes
  • Available on all Mix channels
  • 12 band parametric with RTA overlay
  • Selectable Low/Hi Pass Filters

-----

Release notes:
https://www.allen-heath.com/media/dLive-Release-Notes-V1.90.pdf

Firmware upgrade guide (RTFM!!!):
https://www.allen-heath.com/media/dLive-firmware-update-instructions-Issue-5.pdf

Firmware Reference Guide (Manual):
https://www.allen-heath.com/media/dLive-Firmware-Reference-Guide-V1.90.pdf


-----

Quote
Hi Team!

1.9 is available to download now from the Allen & Heath website https://www.allen-heath.com/dlive-home/software/

Details at the webpage below!
https://www.allen-heath.com/dlive-v1-9/

I'll be doing a stream this afternoon talking through the new features along with a Q&A.
https://www.facebook.com/AllenHeathofficial/posts/4415377385151443
https://www.youtube.com/watch?v=pLjMb6C5Ofc​​​​​​​

There will be a webinar session running twice tomorrow featuring a more in depth technical look at the release, all times UK.
10AM Session:
https://us06web.zoom.us/.../reg.../WN_jUhq4bIVRseWV0N3fdrqww

4PM Session:
https://us06web.zoom.us/.../reg.../WN_GCoJXsORTCepmCsw2eriSA
Hope to see you there!

-Jack Kenyon [A&H dLive product manager]

----

Previous Firmware:
https://forums.prosoundweb.com/index.php/topic,170545

Other related threads:
https://forums.prosoundweb.com/index.php/topic,155022.0.html [dLive sound quality
https://forums.prosoundweb.com/index.php/topic,164960.0.html [New mixer guidance]
https://forums.prosoundweb.com/index.php/topic,159587.0.html [dLive / CL5]
https://forums.prosoundweb.com/index.php/topic,171630.0.html [Director / surfaceless]
https://forums.prosoundweb.com/index.php/topic,171355.0.html [dLive custom control]
https://forums.prosoundweb.com/index.php/topic,165344.0.html [Latency measurements]
https://forums.prosoundweb.com/index.php/topic,172168.0.html [Avantis vs dLive]
https://forums.prosoundweb.com/index.php/topic,173562.0.html [Avantis]
https://forums.prosoundweb.com/index.php/topic,165251.0.html [SQ series]
« Last Edit: September 14, 2021, 11:05:39 AM by Nathan Riddle »
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Andrew Broughton

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1850
    • Check Check One Two
Re: A&H dLive version 1.9 is out
« Reply #1 on: September 14, 2021, 11:07:58 AM »

Have you been able to locate a new MIDI document? All I can find on the website is the 1.50 version.
Logged
-Andy

"Well, my days of not taking you seriously are certainly coming to a middle..."

http://www.checkcheckonetwo.com
Saving lives through Digital Audio, Programming and Electronics.

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1934
  • Niceville, FL
    • Nailed Productions
Re: A&H dLive version 1.9 is out
« Reply #2 on: September 14, 2021, 11:28:59 AM »

Have you been able to locate a new MIDI document? All I can find on the website is the 1.50 version.

Negative.

Quote
Im in the process of updating the TCP MIDI protocol document. Ill have the new version online by the end of week.
-Nicola A&H

This is old too (oct 2020).
https://www.allen-heath.com/midi-control/
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Scott Slater

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 352
Re: A&H dLive version 1.9 is out
« Reply #3 on: September 14, 2021, 12:36:19 PM »

Nice.  Have a gig scheduled for our dLive on Oct 2 & 3.  Looking forward to giving this a try.
Logged

Nick Andrews

  • Full Member
  • ***
  • Offline Offline
  • Posts: 106
Re: A&H dLive version 1.9 is out
« Reply #4 on: September 15, 2021, 01:30:53 AM »

Introduction to 1.9
https://www.youtube.com/watch?v=pLjMb6C5Ofc

Main Features:
  • Source Expander, Dual Treshold Expander and Bus compressor DEEP models
  • NEQ swap any GEQ for a 12-band PEQ
  • New, comprehensive RTA and sonogram tools
  • Integration with Sennheiser wireless microphones
  • Gain sharing across dLive MixRacks
  • and quite a lot more.

Source Expander(s)
  • Reduce bleed and increase gain-before-feedback
  • Enhance vocal performances
  • Clean up drum channels without losing ambience
  • Minimise the risk of feedback during live performances
  • Simple two-knob control for "set and forget" operation
  • Three speed settings

Sennheiser Integration
  • Compatible with:
    -300 (G3/G4)
    -500 (G3/G4)
    -2000
    -2050
  • Connect up to 50 supported receivers (50-200 wireless channels)
  • Auto-detect feature for plug and play operation
  • One screen overview of connected Sennheiser devices
  • Quickly associate Sennheiser wireless channels with dLive inputs
  • Bank view shows priority information:
    -Battery level
    -RF Strength
    -Audio signal level
  • Control Sennheiser receiver parameters from dLive:
    -Receiver gain (up/down)
    -Receiver mute
    -Locate receiver
  • Key information on Preamp page:
    -RF signal strength
    -Battery level
    -Audio signal level
    -Audio signal peak
    -Mute (receiver)

NEQ12 (12 band PEQ for mixes)
  • Swap any GEQ for NEQ
  • Perfect for crafting IEM mixes
  • Available on all Mix channels
  • 12 band parametric with RTA overlay
  • Selectable Low/Hi Pass Filters

-----

Release notes:
https://www.allen-heath.com/media/dLive-Release-Notes-V1.90.pdf

Firmware upgrade guide (RTFM!!!):
https://www.allen-heath.com/media/dLive-firmware-update-instructions-Issue-5.pdf

Firmware Reference Guide (Manual):
https://www.allen-heath.com/media/dLive-Firmware-Reference-Guide-V1.90.pdf


-----

----

Previous Firmware:
https://forums.prosoundweb.com/index.php/topic,170545

Other related threads:
https://forums.prosoundweb.com/index.php/topic,155022.0.html [dLive sound quality
https://forums.prosoundweb.com/index.php/topic,164960.0.html [New mixer guidance]
https://forums.prosoundweb.com/index.php/topic,159587.0.html [dLive / CL5]
https://forums.prosoundweb.com/index.php/topic,171630.0.html [Director / surfaceless]
https://forums.prosoundweb.com/index.php/topic,171355.0.html [dLive custom control]
https://forums.prosoundweb.com/index.php/topic,165344.0.html [Latency measurements]
https://forums.prosoundweb.com/index.php/topic,172168.0.html [Avantis vs dLive]
https://forums.prosoundweb.com/index.php/topic,173562.0.html [Avantis]
https://forums.prosoundweb.com/index.php/topic,165251.0.html [SQ series]

Sweet some much needed things they finally hit ! Great job allen and heath !

Now let's convince David to make a mixing station app foe the dlive and I will be one happy camper ....

Or allen and heath expand the capabilities of your iPad app so we can control fx parameter and do more with the iPad!

Cheers

Nick
Logged

Helge A Bentsen

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1250
  • Oslo, Norway.
Re: A&H dLive version 1.9 is out
« Reply #5 on: September 15, 2021, 05:08:26 AM »

D:Live still has a most annoying "feature", PFL is moved pre EQ if you assign an input to AMM.
Logged

Scott Slater

  • Sr. Member
  • ****
  • Offline Offline
  • Posts: 352
Re: A&H dLive version 1.9 is out
« Reply #6 on: September 15, 2021, 06:06:01 AM »

Now let's convince David to make a mixing station app foe the dlive and I will be one happy camper ....

Or allen and heath expand the capabilities of your iPad app so we can control fx parameter and do more with the iPad!
I would like to see an easier way to make fine "gain" adjustments when using director on a tablet without a keyboard.  If they did it similar to the iPad that would be good, or even an option to put gain on faders temporarily.
Logged

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1934
  • Niceville, FL
    • Nailed Productions
Re: A&H dLive version 1.9 is out
« Reply #7 on: September 15, 2021, 07:57:26 AM »

Sweet some much needed things they finally hit ! Great job allen and heath !

Now let's convince David to make a mixing station app foe the dlive and I will be one happy camper ....

Or allen and heath expand the capabilities of your iPad app so we can control fx parameter and do more with the iPad!

Cheers

Nick

I've spoken with David @ Dev-Core.org, he needs a dLive console to test. I offered him mine but he wouldn't let me ship it over the pond. If someone local (Germany) had one for him to test...

Also, I agree the current app sucks...
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Jeff Lelko

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 1724
  • Cape Canaveral, FL
Re: A&H dLive version 1.9 is out
« Reply #8 on: September 15, 2021, 10:10:10 PM »

Thanks for sharing!  I'll definitely need to go update mine and try out the new features!
Logged

Scott Holtzman

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 6411
  • Ghost AV - Avon Lake, OH
    • Ghost Audio Visual Systems, LLC
Re: A&H dLive version 1.9 is out
« Reply #9 on: September 16, 2021, 03:18:43 AM »

Introduction to 1.9
https://www.youtube.com/watch?v=pLjMb6C5Ofc

Main Features:
  • Source Expander, Dual Treshold Expander and Bus compressor DEEP models
  • NEQ swap any GEQ for a 12-band PEQ
  • New, comprehensive RTA and sonogram tools
  • Integration with Sennheiser wireless microphones
  • Gain sharing across dLive MixRacks
  • and quite a lot more.
Source Expander(s)
  • Reduce bleed and increase gain-before-feedback
  • Enhance vocal performances
  • Clean up drum channels without losing ambience
  • Minimise the risk of feedback during live performances
  • Simple two-knob control for "set and forget" operation
  • Three speed settings
Sennheiser Integration
  • Compatible with:
    -300 (G3/G4)
    -500 (G3/G4)
    -2000
    -2050
  • Connect up to 50 supported receivers (50-200 wireless channels)
  • Auto-detect feature for plug and play operation
  • One screen overview of connected Sennheiser devices
  • Quickly associate Sennheiser wireless channels with dLive inputs
  • Bank view shows priority information:
    -Battery level
    -RF Strength
    -Audio signal level
  • Control Sennheiser receiver parameters from dLive:
    -Receiver gain (up/down)
    -Receiver mute
    -Locate receiver
  • Key information on Preamp page:
    -RF signal strength
    -Battery level
    -Audio signal level
    -Audio signal peak
    -Mute (receiver)
NEQ12 (12 band PEQ for mixes)
  • Swap any GEQ for NEQ
  • Perfect for crafting IEM mixes
  • Available on all Mix channels
  • 12 band parametric with RTA overlay
  • Selectable Low/Hi Pass Filters
-----

Release notes:
https://www.allen-heath.com/media/dLive-Release-Notes-V1.90.pdf

Firmware upgrade guide (RTFM!!!):
https://www.allen-heath.com/media/dLive-firmware-update-instructions-Issue-5.pdf

Firmware Reference Guide (Manual):
https://www.allen-heath.com/media/dLive-Firmware-Reference-Guide-V1.90.pdf


-----

----

Previous Firmware:
https://forums.prosoundweb.com/index.php/topic,170545

Other related threads:
https://forums.prosoundweb.com/index.php/topic,155022.0.html [dLive sound quality
https://forums.prosoundweb.com/index.php/topic,164960.0.html [New mixer guidance]
https://forums.prosoundweb.com/index.php/topic,159587.0.html [dLive / CL5]
https://forums.prosoundweb.com/index.php/topic,171630.0.html [Director / surfaceless]
https://forums.prosoundweb.com/index.php/topic,171355.0.html [dLive custom control]
https://forums.prosoundweb.com/index.php/topic,165344.0.html [Latency measurements]
https://forums.prosoundweb.com/index.php/topic,172168.0.html [Avantis vs dLive]
https://forums.prosoundweb.com/index.php/topic,173562.0.html [Avantis]
https://forums.prosoundweb.com/index.php/topic,165251.0.html [SQ series]


What an amazing feature when not gigging you can provide sonograms? 
Logged
Scott AKA "Skyking" Holtzman

Ghost Audio Visual Solutions, LLC
Cleveland OH
www.ghostav.rocks

ProSoundWeb Community

Re: A&H dLive version 1.9 is out
« Reply #9 on: September 16, 2021, 03:18:43 AM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.033 seconds with 22 queries.