ProSoundWeb Community

Please login or register.

Login with username, password and session length
Advanced search  

Pages: [1]   Go Down

Author Topic: Allen & Heath SQ7 Rookie Questions  (Read 1454 times)

Nathan West

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Allen & Heath SQ7 Rookie Questions
« on: September 03, 2021, 09:27:51 PM »

I haven't been on the SQ7 in a couple of years - so I'm a little bit rusty.  Here what I want to do:
I want to send to the L/R and the 3 Matrixs - Mains and 3 pairs of delays (with different delay settings)

So I think I figured it out in SQ Mixpad - but not on the hardware - which BTW I won't get on till 2 weeks on
show site - so how to set this up on the hardware board?
Logged

Nathan West

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Posting Rules
« Reply #1 on: September 04, 2021, 07:50:50 AM »

Please go to your profile and change the "Name" field to your real first and last name as required by the posting rules displayed in the header at the top of the section, and in the Site Rules and Suggestions in the Forum Announcements section, and on the registration page when you registered.

Mac
admin

Done
Logged

Nathan Riddle

  • Hero Member
  • *****
  • Offline Offline
  • Posts: 2005
  • Niceville, FL
    • Nailed Productions
Re: Allen & Heath SQ7 Rookie Questions
« Reply #2 on: September 04, 2021, 11:07:56 PM »

1) Press LR mix key (blue) above master fader (far right)
2) Press Sel (green) above master fader (far right)
3) Select 'Routing' (Green) below center screen
4) You should see matrix sends at the bottom

Alternatively, you can select the matrix; go to routing; see which aux/group/lr sends are going to the matrix


Useful info here:
https://fb.watch/7PY2LvTzqI/

Surprisingly difficult to find the routing page.
« Last Edit: September 04, 2021, 11:17:35 PM by Nathan Riddle »
Logged
I'm just a guy trying to do the next right thing.

This business is for people with too much energy for desk jobs and too much brain for labor jobs. - Scott Helmke

Nathan West

  • Newbie
  • *
  • Offline Offline
  • Posts: 3
Re: Allen & Heath SQ7 Rookie Questions
« Reply #3 on: September 06, 2021, 04:39:08 PM »

1) Press LR mix key (blue) above master fader (far right)
2) Press Sel (green) above master fader (far right)
3) Select 'Routing' (Green) below center screen
4) You should see matrix sends at the bottom

Alternatively, you can select the matrix; go to routing; see which aux/group/lr sends are going to the matrix


Useful info here:
https://fb.watch/7PY2LvTzqI/

Surprisingly difficult to find the routing page.

Thank You. It is very difficult to rind the routing page.
Logged

ProSoundWeb Community

Re: Allen & Heath SQ7 Rookie Questions
« Reply #3 on: September 06, 2021, 04:39:08 PM »


Pages: [1]   Go Up
 



Site Hosted By Ashdown Technologies, Inc.

Page created in 0.026 seconds with 20 queries.